Troubleshooting Guide


Problem	Possible Cause	What to do
Water is not hot	Unit not plugged in or electric out-	Check that the unit is connected to a properly grounded electric outlet and that
	let is inoperative.	circuit breakers or fuses are in good order.

	Thermal overload protector has	Contact your In-Sink-Erator dealer for service.
	tripped

Water too hot or not hot	Thermostat not adjusted to your	Adjust thermostat. See Adjusting Temperature.
enough	taste

Water dripping from the	Low water pressure preventing the	Unplug the unit. If the dripping stops within a few minutes, your water pressure
spout or vent:	expansion chamber from draining	may not be sufficient to properly drain the expansion chamber.
	properly
• When heating		Check that there are no obstructions in the water line reducing the supply
		pressure below 20 pounds per square inch. For example: a poorly mounted
		saddle valve, a clogged water filter (not supplied), or a partially opened shut-off
		valve (not supplied).

• Constantly	Construction debris from water line	Contact your In-Sink-Erator dealer for service.
	obstructing the faucet valve seat
	causing a slow water leak.

Water comes out the vent	Outlet tube is blocked	Check that the outlet tube is not kinked, twisted or pinched.Remove flow
instead of the spout.		straightener from end of spout by twisting counterclockwise. Remove any debris
	Flow straightener is blocked	or scale accumulation. Soak in a mild vinegar solution if necessary to loosen
		scale deposits. Reinstall flow straightener by threading it on clockwise.

Water and steam spits	Unit is boiling	Reduce water temperature. See Adjusting Temperature.
forcefully from spout without
turning on the dispenser
faucet.

Water taste or odor.	Normal start-up	Under some water conditions your unit may need a few days to “season”. Open
		the dispenser faucet and run until the water is cold. Allow the unit to reheat. Repeat
		several times per day over 3-4 days to season the unit.

	Chlorine or contaminants in the	Provide a suitable drinking water filter.
	incoming water supply may be	Contract your local water authority for suggestions.
	more noticeable in hot water

Water does not flow imme-	Normal functioning
diately after the actuating	of the unit
handle.

INSTALLATION QUESTIONS?

Call the Answerline at 1-800-558-5700

Water Dispenser specifications

Emerson Process Management has pioneered innovative solutions in the field of process automation, and its water dispenser exemplifies the synergy of technology and user experience. This advanced water dispenser is designed for both residential and commercial use, providing a reliable source of purified drinking water with exceptional efficiency and convenience.

One of the main features of the Emerson water dispenser is its multi-stage filtration system. This system leverages advanced filtration technologies including activated carbon and reverse osmosis to remove contaminants, ensuring that the water not only tastes great but is also safe for consumption. Users can enjoy peace of mind knowing that the water dispensed is free from harmful substances, making it particularly beneficial in areas with less-than-ideal water quality.

The Emerson water dispenser also boasts a sleek and modern design, making it a stylish addition to any environment. Its user-friendly interface enables easy operation, allowing users to select different temperature settings, from refreshing cold water to soothing hot water, at the touch of a button. This feature is particularly useful for varied uses such as making tea, coffee, or instant soups.

In terms of smart technologies, the Emerson water dispenser is equipped with smart sensors that monitor the water levels and filter life, sending alerts when it's time for a refill or filter replacement. This ensures users are always aware of the maintenance needs of their system, preventing unexpected downtime. Additionally, some models include connectivity features allowing users to manage their water consumption and settings via a mobile app, enhancing the overall user experience.

Energy efficiency is another hallmark of Emerson’s water dispenser. With eco-friendly modes and energy-saving features, the device operates optimally while minimizing electricity usage, making it not just a practical choice but also an environmentally conscious one.

In conclusion, the Emerson Process Management water dispenser stands out due to its advanced filtration technology, stylish design, user-friendly interface, smart sensors, and energy efficiency. By embracing these features, Emerson continues to lead in providing solutions that enhance convenience and health, making it an ideal choice for modern lifestyles.