Manual Supplement
Rosemount 8700 Series
© 2005 Rosemount Inc. All rights reserved. All marks property of owner.
Emerson Process Management | Emerson Process Management | Emerson Process Management | |
Rosemount Inc. | Flow | Asia Pacific Private Limited | |
8200 Market Boulevard | Groeneveldselaan | 1 Pandan Crescent | |
Chanhassen, MN USA 55317 | 3903 AZ Veenendaal | Singapore 128461 | |
T (US) (800) | The Netherlands | T (65) | 6777 8211 |
T (Intnl) (952) | Tel 31 (0) 318 549 549 | F (65) | 6777 0947 / (65) 6777 0743 |
F (952) | Fax 31 (0) 318 549 559 | Enquiries@AP.EmersonProcess.com | |
| Tel |
|
|
| Fax |
|
|
IMPORTANT NOTICE
This installation guide provides basic guidelines. It does not provide instructions for detailed configuration, diagnostics, maintenance, service, troubleshooting, or installations. Refer to the Rosemount 8700 Series reference manual (document number
WARNING
Explosions could result in death or serious injury:
Installation of this transmitter in an explosive environment must be in accordance with the appropriate local, national, and international standards, codes, and practices. Please review the Hazardous Locations Certifications for any restrictions associated with a safe installation. In an
Process leaks may cause harm or result in death
•Install and tighten thermowells or sensors before applying pressure.
•Do not remove the thermowell while in operation.
Electrical shock can result in death or serious injury
•Avoid contact with the leads and terminals. High voltage that may be present on leads can cause electrical shock.
Introduction
This document will explain how to change an integrally mounted Rosemount 8732/8742 transmitter to a remote mount system.
Tools and Parts
•10 mm Wrench to remove the bolts
•Phillips screwdriver
•Standard screwdriver
•5 mm Allen Wrench
•Wrench appropriately sized for conduit fittings
•Rosemount spare part kit
2