Emerson Process Management 8700 manual Preparing the Flowtube, Mount the junction box

Manual Supplement

Rosemount 8700 Series

00809-0300-4727, Rev AA June 2005

STEP 2: PREPARING THE FLOWTUBE

1.Remove the existing o-ring and discard appropriately.

2.Replace the o-ring with the new one supplied with the Remote Junction Box in the conversion kit.

3.Place the remote mount junction box on the flowtube mounting plate.

4.Mount the junction box with the 4 bolts provided in the kit. See Figure 2.

Figure 2. Mount the junction box

Junction Box

Replacement O-Ring

Mounting Plate

Bolts

8711/8711_01aa.eps

4