Kompernass KH 1090 operating instructions Placement Taking into use, Before the first use

Page 6

Placement

Taking into use

 

 

 

Place the switched-on fondue exclusively on level, firm and heat-resistant surfaces in a dry environment.

Important!

To avoid heat related damage and the risk of a fire in the surroundings of the switched-on Electrical Fondue, take steps to ensure that …

the switched-on fondue has an all-round minimum distance of 50 cm from walls, furniture and other objects.

no objects are suspended above the switched-on fondue (e.g. lamps).

there are no easily inflammable objects close to the switched-on fondue (e.g. materials/textiles).

the power cable 4 and the thermo-plinth 5 are not located close to hot surfaces or open flames.

the power cable 4 does not, and cannot, make contact with the thermo-plinth 5.

no moisture and/or fluids can permeate into the thermo-plinth 5.

Note:

On the first usage, the generation of light smoke and a slight smell can occur, this is due to production residues. This is completely normal and is not dangerous. Provide for sufficient ventilation, for example, open a window.

1.Insert the power cable 4 into the thermo-plinth 5.

2.Insert the power cable 4 into a wall power socket.

3.Place the fondue-pot 3 onto the thermo-plinth 5.

Ensure that the Fondue pot 3 stands safely and level on the thermo-plinth 5.

Attention!

Never lay aluminium foil or other materials between the thermo-plinth 5 and the fondue-pot 3, if you do, irreparable damage may be caused to the Elec- trical Fondue. Additionally, there would be the danger of a fire!

Before the first use

Remove all components of the Electrical Fondue from the packaging. Remove all possibly remaining protective foils and clean any packaging-dust remnants from all components that will come into contact with foodstuffs.

Do not use any abrasive cleaners or scouring pads as these will scratch the surfaces!

Warning regarding appliance damage!

NEVER place other kitchen implements (e.g. cooking pans) instead of the Fondue pot 3 onto the thermo-plinth 5. Other cooking pans could tip over during use, as the thermo-plinth 5 is designed to accept only the Fondue pot 3.

Also, do not use the fondue-pot 3 as a cooking implement on other heat sources (e.g. on hotplates), it could be irreparably damaged.

Never apply heat to an empty fondue-pot 3.

4.Pour the amount of cooking oil or bouillon required for the selected dish into the fondue pot 3.

- 4 -

Image 6
Contents Electric Fondue Page Content Intended usage Safety instructionsTips for safety To avoid potentially fatal electric shocksItems supplied Technical dataFunction DescriptionPlacement Taking into use Before the first useNever apply heat to an empty fondue-pot Advice about fondue ingredients Control lamp 7 glowsCleaning and Care TroubleshootingStorage Importer Warranty and ServiceDisposal Case of doubt, please contact your waste disposal centreRecipes Fondue BourguignonneFondue Chinoise Neuenburger Cheese Fondue Fondue with SeafoodSweet-Sour Fondue