Kompernass KH 1090 operating instructions Cleaning and Care, Storage, Troubleshooting

6.Place the fondue-pot 3 with the food to be kept warm onto the thermo-plinth 5.

7.Turn the temperature regulator 6 to heating level 1-2 for the keeping warm of liquid dishes such as soup etc. .

Cleaning and Care

Attention!

First of all remove the power cable 4 from the wall socket before cleaning the Electrical Fondue and its components! Otherwise, there is the risk of receiving an electric shock!

Attention!

After using the Electrical Fondue, wait until the thermo-plinth 5 and the fondue-pot 3 have cooled down completely! The risk of burns is ever present!

When you have removed the power cable 4 of the Electrical Fondue from the wall socket and the fondue-pot 3 and the thermo-plinth 5 have cooled down …

1.Remove the cooking oil from the fondue-pot 3.

2.Wash the fondue-pot 3 thoroughly in warm water with a mild dish detergent.

3.If necessary, clean the housing of the themo- plinth 5 with a moist sponge.

Attention!

NEVER submerge the thermo-plinth 5 in water to clean it! The appliance could become irreparably damaged!

Storage

•Remove the power cable 4 from both the wall socket and the thermo-plinth 5 when the appliance is not being used.

•Always wait until the thermo-plinth 5 and the fondue-pot 3 have cooled down completely before packing the Electrical Fondue and its components away after use.

•For the sake of safety, always store the Electrical Fondue out of the reach of children.

Troubleshooting

Should the Electrical Fondue not function or not function correctly …

1.Check to ensure that the power cable 4 is correctly connected to the thermo-plinth 5.

2.Check to see that the power cable is correctly connected to the wall socket.

3.Check to see if the wall socket to which the Elec- trical Fondue is connected is "live", in that another appliance is connected to it.

If the malfunction cannot be traced back to one of these causes …

4.Remove the power cable from the wall socket and allow the thermo-plinth 5 to cool down completely.

5.Re-insert the power cable into a wall socket.

Should the malfunction not be corrected by the measures described above, please make contact with one of our service-partners in your locality.

- 6 -