Electrolux WDU4100 manual Cleaning and Maintenance, Something Not Working?, Removable splash guard

Cleaning and Maintenance

Important

Before any maintenance or cleaning is carried out, you must DISCONNECT the appliance from the electricity supply.

Do NOT operate the disposer without the splash guard is in place.

Cleaning

The disposer is self-cleaning, but you can flush it by filling the sink with cold water, turning on the disposer and removing the plug. While the water is draining through the disposer, allow the tap to continue running. When the sink is empty, your disposer will be clean.

Removable splash guard

REMOVE SPLASH GUARD

TURNTABLE

If you need to remove or replace the splash guard, simply pull the guard out from the top. To replace the guard, insert it into the flange.

Something Not Working?

Before contacting your local Electrolux Service Centre, we recommend that you do a few simple checks:

PROBLEM	CAUSE	SOLUTION
The disposer	• Bottle caps or similar objects	• Turn off the disposer control switch, and
is noisy	have fallen into the disposer	water, wait for cutting disc to stop, then
		remove the object.
	• Check to see if the turntable	• Turn off the disposer control switch and water,
	will rotate freely	wait for cutting disc to stop, then remove
		the object by using tongs or pliers to free it.
The disposer is	• If the turntable is rotating freely:	• This button may require resetting only
not running	Check the reset button, to see	(depress the red button, until it clicks and
	if it has tripped	it clicks and remains depressed).
	• If reset button has not tripped	• Check plug top fuse and control switch fuse.
		If the disposer is supplied from a 13 amp
		socket, plug another appliance i.e. food mixer
		etc. into the socket to check the supply. Also
		your fuse box or circuit breaker. If the fuses
		and supply are all intact, contact your local
		Service Force Centre.

8