Directed Electronics manual Specifications, Viper model d2500.1

Page 19

SPECIFICATIONS

Viper model d2500.1

RMS continuous power driven into 4 ohms from 20 to 250 Hz @ 14.4 VDC at rated power/load.

RMS continuous power driven into 2 ohms from 20 to 250 Hz @ 14.4 VDC at rated power/load.

Dynamic power rating (IHF-202 Standard) minimum load.

Signal-to-Noise Ratio

Frequency Response

Damping Factor

Crossover

Subsonic Filter

Bass Equalization

Input Impedance

Input Sensitivity

Output Impedance Supply Voltage Fusing and Power

Minimum Cable Requirements (AWG) (+) 12 Volt (Per amp, trunk mounted)

Minimum Cable Requirements (Ground)

1500 watts

0.8% THD

2500 watts

1.0% THD

2700 watts

Greater than 80 dB

20-250 Hz +0, -1 dB

50 (typical)

Low-pass 24 dB/octave, variable from 30 to 250 Hz

Switchable 24 dB/ octave, variable from 20 to 250 Hz

Variable 0 to +12 dB, centered at 40Hz

20K ohms

Variable from 150 mV to 8 volt

2 to 4 ohms

10 to 16 VDC

200A

#0 Battery to fuse block #4x2 Fuse block to amplifier

#4x2 Amplifier to chassis

© 2002 Directed Electronics, Inc

19

Image 19
Contents Model d2500.1 Directed Electronics, Inc Congratulations Table of ContentsLimited TWO-YEAR Consumer Warranty „ High-speed Mosfet switching power supply FeaturesInstallation Guidelines Due to the high-frequency Mosfet Wire Connector PlugsAmplifier Connections d2500.1 Front Front Panel ConnectionsRear Panel Connections Amplifier Connections d2500.1 Rear Amplifier Controls TOP TOP Panel ControlsViper Badge Mounting TOP Panel FeaturesControl Panel Cover Illuminated Window AlignmentSpeaker Wiring Diagrams Combining Amplifiers Combined Amplifiers Gain and Filter SettingsParallel Synced Gain Multiple Amplifier Combinations Slave/Master Switch Parallel Synced Gain CONNECTIONS/SETTINGSMaster Subwoofer Wiring bottom viewSlave Crossover Settings and Gain Adjustment Viper model d2500.1 SpecificationsDirected Electronics, Inc Vista, California

d2500.1 specifications

The Directed Electronics D2500.1 is a cutting-edge component in the realm of car audio and electronics, designed to offer both functionality and power for audiophiles and casual listeners alike. This amplifier is part of Directed’s robust lineup, which is well known for its innovative features and reliability, catering to a wide range of vehicle audio needs.

One of the standout characteristics of the D2500.1 is its exceptional power output. Delivering 2500 watts of peak power, it is capable of driving subwoofers and speakers with ease, producing deep, rich bass tones that elevate any listening experience. The amplifier employs advanced Class D technology, which allows it to operate efficiently while minimizing heat generation. This efficiency not only conserves energy but also prolongs the lifespan of the components.

The D2500.1 is designed with user-friendliness in mind. It comes equipped with a built-in adjustable low-pass filter, allowing users to fine-tune their audio output according to their preferences. Furthermore, the amplifier features a variable bass boost, giving users the ability to enhance lower frequencies for a more immersive sound experience. With its stability in various impedance loads, the D2500.1 can comfortably support a wide array of speaker systems, making it incredibly versatile.

Additionally, the amplifier's compact design makes installation straightforward, even in limited spaces. Directed Electronics has emphasized durability in the construction of the D2500.1, ensuring it can withstand the rigors of everyday use in vehicles. The robust heat sink helps maintain optimal operating temperatures, contributing to reliable performance over time.

Another important aspect of the D2500.1 is its compatibility with various audio sources and configurations. Whether you are using it with a single subwoofer or a more complex multi-speaker system, the amplifier can adapt to different setups. This flexibility, combined with its powerful output and innovative features, makes it an exceptional choice for anyone looking to enhance their car audio experience.

Overall, the Directed Electronics D2500.1 stands out as a top-tier amplifier that seamlessly blends power, efficiency, and user-friendly features. It exemplifies the commitment of Directed Electronics to deliver high-quality audio solutions catering to enthusiasts and casual listeners, ensuring that every ride can be enjoyed with superior sound quality.