Directed Electronics d2500.1 manual Installation Guidelines

Page 6

INSTALLATION GUIDELINES

1.Please read this owner’s manual carefully before installing this ampli- fier.

2.Disconnect the battery ground terminal prior to making any elec- trical connections.

3.Check for any hazards or obstruc- tions such as gas tanks, fuel or brake lines, and wiring harnesses before mounting the amplifier.

4.Pick a mounting location that will provide adequate access and venti- lation and protect the amplifier from heat, moisture, and dirt.

5.Avoid sharp metal areas when routing cables to the amplifier, and run RCA cables away from the power cables and other potentially noisy car harnesses.

6.The amplifier should be grounded with a short, heavy gauge wire connected directly to the car at a bare metal surface, preferably scraped body sheet metal. Do not use factory ground locations, seat bolts, or brackets that are spotwelded.

7.Always fuse your power connection within 8 to 10 inches of the battery

terminal. Use a fuse or circuit breaker rated slightly more than the fuse(s) of the amplifier. The gauge of power wire used should take into account the total current draw of the system, and the length of wire used. IASCA and other auto sound competition organizations have charts available for this; you can also find a chart in the MECP study guide. Minimum wire gauge recom- mendations for the individual ampli- fiers are listed on the specification page. Always use the same gauge wire for the amplifier ground that you use for the power wire. Be sure to examine the battery ground cable of the vehicle, and if neces- sary, upgrade it by adding an addi- tional ground wire that is the same gauge as the amplifier’s power wire. Remember, the amplifier can only deliver its rated output when it is not current limited by the power and ground supply wires.

8.This amplifier is designed to drive a speaker load that measures from 2 to 4 ohms. Keep in mind that heat is the long-term enemy of automo- tive electronics and the lower your speaker load, the more heat is

6

© 2002 Directed Electronics, Inc

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model d2500.1 Directed Electronics, Inc Table of Contents CongratulationsLimited TWO-YEAR Consumer Warranty Features „ High-speed Mosfet switching power supplyInstallation Guidelines Wire Connector Plugs Due to the high-frequency MosfetFront Panel Connections Amplifier Connections d2500.1 FrontRear Panel Connections Amplifier Connections d2500.1 Rear TOP Panel Controls Amplifier Controls TOPIlluminated Window Alignment TOP Panel FeaturesControl Panel Cover Viper Badge MountingSpeaker Wiring Diagrams Combined Amplifiers Gain and Filter Settings Combining AmplifiersParallel Synced Gain Multiple Amplifier Combinations Parallel Synced Gain CONNECTIONS/SETTINGS Slave/Master SwitchSubwoofer Wiring bottom view MasterSlave Crossover Settings and Gain Adjustment Specifications Viper model d2500.1Directed Electronics, Inc Vista, California

d2500.1 specifications

The Directed Electronics D2500.1 is a cutting-edge component in the realm of car audio and electronics, designed to offer both functionality and power for audiophiles and casual listeners alike. This amplifier is part of Directed’s robust lineup, which is well known for its innovative features and reliability, catering to a wide range of vehicle audio needs.

One of the standout characteristics of the D2500.1 is its exceptional power output. Delivering 2500 watts of peak power, it is capable of driving subwoofers and speakers with ease, producing deep, rich bass tones that elevate any listening experience. The amplifier employs advanced Class D technology, which allows it to operate efficiently while minimizing heat generation. This efficiency not only conserves energy but also prolongs the lifespan of the components.

The D2500.1 is designed with user-friendliness in mind. It comes equipped with a built-in adjustable low-pass filter, allowing users to fine-tune their audio output according to their preferences. Furthermore, the amplifier features a variable bass boost, giving users the ability to enhance lower frequencies for a more immersive sound experience. With its stability in various impedance loads, the D2500.1 can comfortably support a wide array of speaker systems, making it incredibly versatile.

Additionally, the amplifier's compact design makes installation straightforward, even in limited spaces. Directed Electronics has emphasized durability in the construction of the D2500.1, ensuring it can withstand the rigors of everyday use in vehicles. The robust heat sink helps maintain optimal operating temperatures, contributing to reliable performance over time.

Another important aspect of the D2500.1 is its compatibility with various audio sources and configurations. Whether you are using it with a single subwoofer or a more complex multi-speaker system, the amplifier can adapt to different setups. This flexibility, combined with its powerful output and innovative features, makes it an exceptional choice for anyone looking to enhance their car audio experience.

Overall, the Directed Electronics D2500.1 stands out as a top-tier amplifier that seamlessly blends power, efficiency, and user-friendly features. It exemplifies the commitment of Directed Electronics to deliver high-quality audio solutions catering to enthusiasts and casual listeners, ensuring that every ride can be enjoyed with superior sound quality.
Top Page Image Contents