Directed Electronics manual Front Panel Connections, Amplifier Connections d2500.1 Front

Page 8

FRONT PANEL CONNECTIONS

1.RCA Input Jacks - Accepts line level outputs from head units or signal processors at voltages between 150mV and 8 volts.

2.RCA Sync Out Jack - This RCA jack sends a synced, or in-phase, gain matched signal to a slave d2500.1 when connected in the Parallel Synced Gain combination. (Refer to Combined Amplifiers section of this guide.)

3.RCA Slave In Jack - This RCA accepts input from a master d2500.1 when connected in the Parallel Synced Gain combination. (Refer to Combined Amplifiers section of this guide.)

4.Slave/Master Switch - Controls whether the amplifier is a slave or master when connected in the Parallel Synced Gain combination. (Refer to the Combined Amplifiers section of this guide.)

5.Remote Sub Level Control - Controls the subwoofer amplifier gain controls from a remote location for ease of adjustment during listening.

Warning: DO NOT connect a level control knob from other manufacturers to the Remote Sub Level Control of any Viper amplifier. Even though the connectors fit properly, the control knob and connector pin posi- tions may be different and the amplifier will be damaged.

FIGURE 1—AMPLIFIER CONNECTIONS d2500.1 FRONT

1

2

3

4

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

© 2002 Directed Electronics, Inc

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model d2500.1 Directed Electronics, Inc Table of Contents CongratulationsLimited TWO-YEAR Consumer Warranty Features „ High-speed Mosfet switching power supplyInstallation Guidelines Wire Connector Plugs Due to the high-frequency MosfetFront Panel Connections Amplifier Connections d2500.1 FrontRear Panel Connections Amplifier Connections d2500.1 Rear TOP Panel Controls Amplifier Controls TOPTOP Panel Features Control Panel CoverIlluminated Window Alignment Viper Badge MountingSpeaker Wiring Diagrams Parallel Synced Gain Combined Amplifiers Gain and Filter SettingsCombining Amplifiers Multiple Amplifier Combinations Parallel Synced Gain CONNECTIONS/SETTINGS Slave/Master SwitchSlave Subwoofer Wiring bottom viewMaster Crossover Settings and Gain Adjustment Specifications Viper model d2500.1Directed Electronics, Inc Vista, California

d2500.1 specifications

The Directed Electronics D2500.1 is a cutting-edge component in the realm of car audio and electronics, designed to offer both functionality and power for audiophiles and casual listeners alike. This amplifier is part of Directed’s robust lineup, which is well known for its innovative features and reliability, catering to a wide range of vehicle audio needs.

One of the standout characteristics of the D2500.1 is its exceptional power output. Delivering 2500 watts of peak power, it is capable of driving subwoofers and speakers with ease, producing deep, rich bass tones that elevate any listening experience. The amplifier employs advanced Class D technology, which allows it to operate efficiently while minimizing heat generation. This efficiency not only conserves energy but also prolongs the lifespan of the components.

The D2500.1 is designed with user-friendliness in mind. It comes equipped with a built-in adjustable low-pass filter, allowing users to fine-tune their audio output according to their preferences. Furthermore, the amplifier features a variable bass boost, giving users the ability to enhance lower frequencies for a more immersive sound experience. With its stability in various impedance loads, the D2500.1 can comfortably support a wide array of speaker systems, making it incredibly versatile.

Additionally, the amplifier's compact design makes installation straightforward, even in limited spaces. Directed Electronics has emphasized durability in the construction of the D2500.1, ensuring it can withstand the rigors of everyday use in vehicles. The robust heat sink helps maintain optimal operating temperatures, contributing to reliable performance over time.

Another important aspect of the D2500.1 is its compatibility with various audio sources and configurations. Whether you are using it with a single subwoofer or a more complex multi-speaker system, the amplifier can adapt to different setups. This flexibility, combined with its powerful output and innovative features, makes it an exceptional choice for anyone looking to enhance their car audio experience.

Overall, the Directed Electronics D2500.1 stands out as a top-tier amplifier that seamlessly blends power, efficiency, and user-friendly features. It exemplifies the commitment of Directed Electronics to deliver high-quality audio solutions catering to enthusiasts and casual listeners, ensuring that every ride can be enjoyed with superior sound quality.
Top Page Image Contents