Directed Electronics D600, D800 owner manual Specifications

Page 14

SPECIFICATIONS

		D600	D800
	Maximum Watts	600W	800W

	RMS continuous Power1	300W	300W

	RMS continuous Power2	N/A	400W

	Frequency Response	20-250Hz	20-250Hz

	Damping Factor	50	50

	Variable Low Pass Crossover	30-250Hz	30-250Hz
	12dB slope	30-250Hz	30-250Hz
	12dB slope

	Subsonic Filter	Yes	Yes

	Bass Boost	Yes	Yes

	Input Impedance	20K	20K

	Input Sensitivity	150mV/7.5V	150mV/7.5V

	Output Load	2 ohms	1 ohms

	Fusing	1 x 40A	2 x 25A

	Illuminated LED Driver	Yes	Yes

	External Fan Driver	Yes	Yes

	Pass Through RCA Jacks	Yes	Yes

1.RMS continuous power driven into 2 ohms from 20 to 250Hz @ 14.4VDC with less than 1% THD+N.

2.RMS continuous power driven into 1 ohms from 20 to 250Hz @ 14.4VDC with less than 1% THD+N.

14	© 2005 Directed Electronics, Inc. all rights reserved

Image 14

Contents Models Table of Contents CongratulationsLimited TWO-YEAR Consumer Warranty Features „ High-speed Mosfet switching power supplyInstallation Guidelines Front Panel CONNECTIONS/CONTROLS Amplifier CONNECTIONS/CONTROLS D600/D800 Front Rear Panel Connections D600 uses 1-40A fuse, the D800 uses 2-25A fusesD600 D800 Speaker Wiring Diagrams Parallel Synced Gain CONNECTIONS/SETTINGS Refer to for wiring detailsCrossover Settings and Gain Adjustment LED Tube Installation Optional CEA SpecificationsSpecifications Vista, California