Directed Electronics D600, D800 owner manual Features, „ High-speed Mosfet switching power supply

Page 4

FEATURES

„Super-efficient Class D PWM design runs much cooler than conventional amps.

„High-speed MOSFET switching power supply.

„High-current complimentary Class D MOSFET outputs stable into one ohm loads. (D600 stable into two ohm load.)

„Thermal, DC offset, reverse polarity, and short circuit protection with status LED.

„Continuously variable 12dB/ octave low-pass crossover.

„Switchable subsonic filter, 24dB/octave .

„Switchable 8 dB bass EQ function.

„Switchable 180° phase inversion.

„Remote subwoofer level control function.

„Variable input sensitivity optimizes match with different signal sources.

„Chrome-plated wire terminals and RCA connectors ensure maximum signal transfer.

„Rugged 2-piece heatsink and cover.

„Unity gain pass-through RCA jacks.

WARNING

High-powered car audio systems may produce sound pressure levels that exceed the

threshold at which hearing loss may result.

They may also impair a driver’s ability to hear traffic sounds or emergency vehi- cles. Use common sense and practice safe listening habits when listening to or adjusting your audio system.

4

© 2005 Directed Electronics, Inc. all rights reserved

 

Image 4
Contents Models Table of Contents CongratulationsLimited TWO-YEAR Consumer Warranty Features „ High-speed Mosfet switching power supplyInstallation Guidelines Front Panel CONNECTIONS/CONTROLS Amplifier CONNECTIONS/CONTROLS D600/D800 Front Rear Panel Connections D600 uses 1-40A fuse, the D800 uses 2-25A fusesD600 D800 Speaker Wiring Diagrams Parallel Synced Gain CONNECTIONS/SETTINGS Refer to for wiring detailsCrossover Settings and Gain Adjustment LED Tube Installation Optional CEA SpecificationsSpecifications Vista, California