Electrolux 269550, 267554, 267552, 267553, 267550, 269552 Installation of Accessories, Always install

Page 15

 

 

 

USA

3.2 WARNINGS REGARDING THE FLUING SYSTEM

CONSTRUCTION TYPE

1b

Before installation check, on the basis of the contents of the

B13

reference standard, to ensure that the volume aspirated by the

fumes exhausting system is greater than the volume of combusted

 

 

gas produced by the appliance (see point 1.1).

 

 

 

If the solution of combusted gas discharge under an extractor

 

 

hood is chosen, observe the distance (shown in the figure)

 

 

between the top of the discharge pipe and the lowest point of the

 

 

hood filters. This distance is defined on the basis of discharge

 

 

pipe diameter "D".

 

 

 

In the case of discharge direction to the outside or into a central

 

 

flue (Fig. "1c"), the discharge ducts must NOT present an overall

 

 

length in excess of 762"(3 metres), must NOT have any reductions

 

 

in diameter, and must be subjected to periodic inspection and,

 

 

when necessary, cleaning.

 

 

 

Warning: Since combusted gas (see figure) can reach very

 

 

high temperatures, check the heat resistant properties of

 

 

extension ducts if fitted and the filters in the extractor hood

 

 

to ensure the materials are compatible with the temperature

 

 

conditions. In addition, periodically check the condition of

 

 

the filters which, if excessively fouled with fat and dirt, will

 

 

reduce the efficiency of the suction system and may catch

 

 

fire.

 

 

 

3.3 INSTALLATION OF ACCESSORIES

 

 

 

Accessories can be easily installed by following the figures below

 

 

together with the relative key.

 

 

 

The screw holes for fixing accessories "A" and "F" are 0.14"(3.5

 

 

mm) in diameter and they must be drilled in-situ on the oven cover

DISCHARGE WITH SHROUD UNDER EXTRACTOR HOOD

in correspondence with the punch marks.

 

 

 

 

CONSTRUCTION TYPE

1a

CONSTRUCTION TYPE

1c

A3

B13

DIRECT UNDUCTED DISCHARGE UNDER EXTRACTOR HOOD

DISCHARGE TO THE OUTSIDE OR CENTRAL FLUE WITH SHROUD

 

LEGENDA:

F:

Conical connections for single outlet (supplied)

 

A:

Cam / draught damper accessory

 

 

(to be ordered from manufacturer)

G:

(always install)

 

B:

Boiler combusted gas discharge

Fixing screws (supplied);

01

C:

Oven chamber convector combusted gas discharge

*:

Commercial extension pipes (not supplied)

E:

Adapter ring for commercial ducts

 

 

 

:

036

 

SILICONE

 

(to be ordered from manufacturer)

 

 

Apply silicone sealant between contact surfaces

5938

 

 

 

 

 

 

 

 

 

15

Image 15
Contents DOC. no 036 Esquema Para LA Instalación Mod GN 1/1 Niveau FonctionnelNivel Funcional Mod GN 2/1 5938 1208 mm 364 mm 335 200 5938 036 5938 Appliance Identification Instructions for Installation and USEDescription of Appliance Main FeaturesGN 1/1 GN 2/1 10 GN 1/1 10 GN 2/1 20 GN 1/1 20 GN 2/1 Technical DataKeep the appliance area free and clear from combustibles PrecautionsDisposal Safeguarding the EnvironmentCleaning USEPlace of Installation PositioningCombusted GAS Discharge Always install Installation of AccessoriesWater Supply Connections Installing the Power Supply CableElectrical Connection Water Mains ConnectionWaring Blocking the Drain is Hazardous GAS ConnectionNominal Heat Output Checking the Supply Pressure aServicing Safety DevicesTroubleshooting Operation Check20-GRID Models Opening the Oven DoorClosing the Oven Door 6- and 10-GRID ModelsMain Cooking Modes Description of the Control PanelIntroduction Main ControlsAdditional Functions Boiler status LEDLED off boiler ready Introduction Switching the Oven onManual Controls Setting the Cooking Cycle Operating LevelImportant do not set the cooking time on Timer TM Setting the Cooking TimeSetting Cooking Humidity Start the cycle. Press the Cooking Start/Stop buttonOven Chamber Humidity Cooking Utility Cooking with TWO Phases in Automatic SequenceDelta Cooking UtilitiesAutomatic Controls Return to menu Select the phasesPhase 1 flashing Selected item Phase 2 flashing Selected itemStoring Recipes or Programs Setting the TIME, Date and Delay StartProgram Selected Editing the SET ParametersRecipe or Program Search Using Preset ProgramsSelected option Information and Error CodesPassword Deleting a Recipe or Program from the MemoryDetergent Switching OFF in the Event of a FaultCare and Maintenance Rinse AIDDescaler Cleaning Method Periodical Maintenance of the BoilerReplacing Consumable Components Special Cleaning Instructions

267553, 267552, 267550, 269550, 267554 specifications

Electrolux has long been synonymous with quality and innovation in the home appliance sector. Among its diverse lineup, the models 269552, 267555, 269551, 267551, and 269555 stand out, showcasing cutting-edge technologies and user-centric features that redefine efficiency and convenience in modern households.

The Electrolux 269552 is lauded for its ergonomic design and sophisticated functionality. This model integrates advanced ergonomic features, making it easy to operate for users of all ages. The design emphasizes user comfort, with intuitive controls and a lightweight frame that enhances maneuverability. In addition, the 269552 boasts a powerful motor that delivers superior performance, ensuring optimal cleaning results across various surfaces.

The 267555 is a standout model focused on energy efficiency and sustainability. With its eco-friendly technology, this model not only minimizes energy consumption but also reduces the environmental footprint. The 267555 features smart sensors that automatically adjust power based on the surface being cleaned, further optimizing energy usage without sacrificing cleaning performance. This model is perfect for environmentally conscious consumers looking for efficiency without compromising on effectiveness.

The Electrolux 269551 and 267551 models share similar DNA but cater to different needs. The 269551 is engineered for heavy-duty cleaning tasks, equipped with high-capacity dust containers and washable filters that improve airflow and maintain suction power over time. Meanwhile, the 267551 offers versatile cleaning options with detachable components for transitioning between various tasks effortlessly.

Lastly, the Electrolux 269555 combines functionality with style. This model comes with a sleek, modern design that complements any home decor, while featuring cutting-edge technology such as smart cleaning modes and app connectivity. Users can control the 269555 from their smartphones, setting schedules and customizing cleaning preferences for maximum convenience.

Together, these Electrolux models offer a blend of performance, innovation, and sustainability. With their unique features and technologies, they represent the brand's commitment to quality and consumer satisfaction, making them ideal choices for anyone looking to enhance their home cleaning experience. Whether you prioritize energy efficiency, design, or heavy-duty capabilities, Electrolux has a model tailored to your needs.