Electrolux JLBIHD906 Installing the Cooker Hood, Drilling the Ceiling/Support Shelf

Page 6

Installing the Cooker Hood

In all cases where the ceiling is not strong enough at the suspension point, the installer must provide strengthening using suitable plates and backing pieces anchored to the structurally sound parts.

Drilling the Ceiling/Support

Shelf

•Use a plumb line to mark the centre of the hob on the ceiling/support shelf.

•Place the drilling template 21 provided on the ceiling/

support shelf, making sure that the template is in the correct position by lining up the axes of the template with those of the hob.

•Mark the centre of the holes in the template.

•Drill the holes at the points marked:

•For concrete ceilings, drill for plugs appropriate to the screw size.

•For hollow brick ceilings with wall thickness of 20

mm:drill ø 10 mm (immediately insert the Dowels not provided).

•For wooden beam ceilings, drill according to the wood screws used.

•For wooden shelf, drill ø 7 mm.

•For the power supply cable feed, drill ø 10 mm.

•For the air outlet (Ducted Version), drill according to the diameter of the external air exhaust duct connec- tion.

•Insert two screws of the following type, crossing them and leaving 4-5 mm from the ceiling:

• For concrete ceilings, use the appropriate plugs for the screw size (not provided).

• For Cavity ceiling with inner space, with wall thickness of approx. 20 mm, Screws (not provided).

• For wooden beam ceilings, use 4 wood screws (not provided).

• For wooden shelf, use 4 screws with washers and nuts (not provided)

Fixing the Frame

•

Loosen the two screws

fastening the lower chimney and

 

 

 

remove this from the lower frame.

�

�

•

Loosen the two screws

fastening the upper chimney

 

 

 

and remove this from the upper frame.

 

 

If you wish to adjust the height of the frame, proceed as

 

 

follows:

 

 

 

 

•

Remove the eight metric screws joining the two col-

 

 

 

 

umns, located at the sides of the frame.

�

�

 

•

Adjust the frame to the height required, then replace

 

 

 

all the screws removed as above.

•Insert the upper chimney stack from above, and leave it running free on the frame.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents JLBIHD906 built-in cooker hood Important Safety Information Contents Description of the Appliance Installation Installation RequirementsUnpacking Installing the Cooker Hood Drilling the Ceiling/Support ShelfFixing the Frame Extraction Ducted Fitting the DuctingFitting the Chimney Recirculation ModeChimney Stack Fitting the Hood BodyElectrical Connections Electrical RequirementsElectrical Connection Recirculation Using the cooker hoodTo Operate ExtractionBasic functions Indicator lights Cleaning the Comfort Panels Maintenance and CleaningExternal cleaning Metal Grease FiltersEnabling/Disabling the alarm signal Cleaning the filtersAlarm signal reset Charcoal FiltersReset the alarm signal To Remove/Replace the Char- coal FiltersChanging the Halogen Spot Lamp Repairs and After Sales Service Something not Working0607

JLBIHD906 specifications

The Electrolux JLBIHD906 is an innovative built-in induction hob that combines cutting-edge technology with stylish design, making it a perfect addition to any modern kitchen. This appliance offers seamless cooking experiences, providing precision, efficiency, and ease of use.

One of the standout features of the JLBIHD906 is its advanced induction technology, which uses electromagnetic energy to heat pots and pans directly, rather than warming the surface of the hob itself. This method not only results in faster cooking times but also keeps the surrounding area cooler, reducing the risk of burns and making it easier to clean.

The hob features five cooking zones, allowing multiple dishes to be prepared simultaneously. Each zone is equipped with a powerful induction element that can quickly respond to changes in temperature settings, offering immediate and precise control over the cooking process. This flexibility is ideal for anyone who enjoys experimenting with different recipes or cooking styles.

Another key characteristic of the JLBIHD906 is its intuitive touch controls, which are designed to simplify the cooking experience. Users can easily adjust settings with a simple tap, and the clear display allows for easy monitoring of cooking times and temperatures. The hob also integrates a timer function, which can be set for each cooking zone, ensuring perfectly cooked meals without the worry of overcooking.

Safety is a top priority with the Electrolux JLBIHD906. The hob includes features like residual heat indicators, which signal when the cooking zones are still hot, and a child lock function that helps prevent accidental activation. Additionally, the automatic shut-off feature enhances safety by turning off the hob after a period of inactivity.

For those who appreciate efficiency, the JLBIHD906 also boasts an energy-efficient design that helps to minimize energy consumption while still delivering high performance. This makes it an environmentally friendly choice for the eco-conscious consumer.

With its sleek, minimalist design, the Electrolux JLBIHD906 not only performs exceptionally but also complements the aesthetic of any kitchen decor. Its stylish appearance, combined with its advanced functionalities, makes it an ideal choice for home chefs looking to elevate their cooking experience, turning daily meal preparation into a simple yet enjoyable task.
Top Page Image Contents