Embedded Voicemail Installation Guide
Page 16 Embedded Voicemail Installation Guide
15-601067 Issue 4 (25 May 2006) IP Office
IP406 V2 Installation The following sections detail the process for installing and testing embedded voicemail for an IP406 V2
system.
1. Requirements
Hardware
IP Office 406 V2 control unit. No voice compression channels are required.
Avaya supplied 512MB Memory (Compact Flash) Card.
Configuration
PC, connected to the IP Office network, with the following installed from the IP Office
Administration CD:
IP Office Manager application.
2. Install the Memory Expansion Card
The IP 406 V2 Memory Card is a Type II Compact Flash memory card. Only a card supplied by Avaya
can be used for embedded voicemail. Compact Flash cards from other sources cannot be used for
embedded voicemail.
1. Switch off the IP office unit before you insert the memory card.
Warning
You must always switch off the IP Office before you insert or remove a memory card.
2. Insert the memory card into the C/F TII card slot on the front of the IP406 V2 control unit. Insert
the card with the memory card label upwards. As you insert the card, the card eject button
adjacent to the slot will come out.
3. Switch on the IP office unit.
3. System Configuration
The system can now be configured for embedded voicemail. See Configuring an IP Office for Embedded
Voicemail.