Reversing the Door
4.Remove the door fitting on the lower right (1) and reposition the door bearing cover from the lower left to the right of the door (2), place the door fitting supplied in the lower left of the door (3). Carefully remove the door to the front and place on one side.
5.Move the upper bearing pivot to the left.
6.Carefully slide the door onto the top bearing pivot and close.
7.Place the lower door bearing with the bearing pivot in the lower left of the door and fasten.
8.Move the door handle from the left to the right and cover the remaining holes with the blank- ing plugs attached.
9.Open the door and fit the plinth cover.
3
2
1
14 | 818 17 |