Installation 9
4Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer
2Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion.
Raising/Lowering Door | Adjusting Flipper Mullion Height |
5 | 3 |
the spokes of the set washer. Set screw will not |
|
be tight, just insert until it is flush with the hinge. |
|
Set Screw |
To adjust the flipper mullion:
1Loosen the set screw located on the flipper mullion hinge.
Adjusting Flipper Mullion Screw