Electrolux EI24BC65GS, 5303918374, 241888404, EI24WC65GS manual Reapply power

Page 10

14Remove button plug from upper left side of door and place in upper right side of door. Place door on lower LH hinge bracket.

Remove Button Plug

From Left Side And

Install On Right Side

15Install upper LH hinge bracket by installing four (4) screws.

If door does not close properly after reversing, the following actions may be taken:

a)Loosen lower hinge screws and align door. Retighten screws.

b)Loosen upper hinge screws and align door. Retighten screws.

c)Remove door gasket, turn 180°, and reinstall.

16Route door harness behind lower front panel. Reconnect door harness to bracket.

17Attach LH toe grille.

18	Reapply power.

Image 10

Contents Use & Care Guide Make a Record for Quick Reference Finding InformationPlease Read and Save This Guide Product Registration CardTable of Contents Safety Important Safety InstructionsInstallation Installing the Wine Cooler / Beverage CenterSite Preparation Electrocution HazardLeveling Leveling the UnitDoor Reversal Reversing the DoorDoor Reversal Reapply power Adjusting the Temperature Start-Up and Temperature ControlStarting the Unit Sabbath Mode Description of FeaturesAlarms OperationDisplay Rack StorageProper Storage Stocking Recommendations Wine Cooler OnlyMaintenance Maintaining Your Wine Cooler/ Beverage CenterAir Filter Before You Call for Service TroubleshootingIf Service is Required Warranty Information Major Appliance Warranty Information

Reapply power.