Electrolux 241888404, 5303918374, EI24BC65GS, EI24WC65GS manual Door Reversal

Page 9

Door Reversal

9

6Remove access cover by removing two (2) screws.

7Shift door harness from one side to the other. Replace access cover.

8Remove plastic RH door closer by removing screw. Remove metal RH door stop by removing screw.

9Install metal LH door stop by installing screw. Do not overtighten.

10Install plastic LH door stop by installing screw.

11Remove lower RH door hinge by removing two (2) screws. Remove P-clamp and install in LH side.

12Install lower LH door closer in lower LH door hinge by installing screw.

13Install lower LH door hinge by installing two

(2) screws. Apply petroleum jelly to lower LH hinge pin.

Image 9
Contents Use & Care Guide Please Read and Save This Guide Finding InformationMake a Record for Quick Reference Product Registration CardTable of Contents Important Safety Instructions SafetyInstalling the Wine Cooler / Beverage Center InstallationElectrocution Hazard Site PreparationLeveling the Unit LevelingReversing the Door Door ReversalDoor Reversal Reapply power Start-Up and Temperature Control Adjusting the TemperatureStarting the Unit Alarms Description of FeaturesSabbath Mode OperationProper Storage StorageDisplay Rack Stocking Recommendations Wine Cooler OnlyMaintaining Your Wine Cooler/ Beverage Center MaintenanceAir Filter Troubleshooting Before You Call for ServiceIf Service is Required Major Appliance Warranty Information Warranty Information