Electrolux 241868904 manual Installing Door Handles, Door Handle Mounting Instructions

Installing Door Handles 9

Door Handle Mounting Instructions

1Remove handles from carton and any other protective

packaging.

2Position freezer handle end caps over upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the refrigerator door.

3While holding handle firmly against door, fasten upper

and lower Allen set screws (B) with supplied Allen wrench.

4 Repeat steps 2 and 3 to install refrigerator handle. Ensure the holes for the set screws are facing towards the freezer door.

NOTE

All set screws should be tightened and sub-flush (Allen set screw should be seated just below the surface of the end cap) of handle end cap. The end caps should be drawn tight to freezer and refrigerator doors with no gaps.

Freezer Upper End Cap Refrigerator Upper End Cap

A

B

A

B

Freezer Lower End Cap

A

B

A

B

Refrigerator Lower End Cap