16Controls
IQ-TouchTM (some models)
Your refrigerator is equipped with a Glass Touch Panel user interface display. It is only necessary to touch the glass. There is no need to press with force. There are three dispenser modes:
1Water
2Ice Cubes
3Crushed Ice
A red indicator light will be illuminated above the active mode.
Touch the icon to activate the options below.
Any of the following options that are activated have a red indicator light above the icon.
fast ice | Increases the production of ice |
fast freeze | Activates a faster rate for freezing food |
dispenser light | On / Off |
control lock | Press and hold for three seconds to activate |
| and deactivate. This restricts undesired |
| changes to the refrigerators settings and |
| prevents use of the ice and water dispenser. |
vacation mode | Conserves energy by increasing the time between |
| automatic defrost. This feature is automatically |
| activated during long periods between door open- |
| ings. Vacation mode is manually activated when |
| the red indicator is lit. |
water filter | Touch to display filter condition status. |
| Press and hold for three seconds to reset. |
air filter | Touch to display filter status. Press and |
| hold for three seconds to reset. |
temp display | Touch to toggle the freezer and fridge |
| temps display on and off. |
| Touch and hold temp display to toggle |
| display from Fahrenheit to Celsius. |
mute sounds | Tones emitted by each keypress can be |
| turned off based on user preference. The |
| sounds are muted when the red indicator is |
| lit. Warning signals will stay active. |
factory default | Resets all refrigerator settings such as |
| temp, temp display and ring tones to their |
| factory default settings. |
on off | Press and hold for three seconds to turn off |
| the cooling system to clean the refrigera- |
| tor. It also turns off all dispenser functions. |
| The temperature display will read OFF. |
IMPORTANT
Pressing the system off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet.
Setting cooling temperatures
1Touch the glass panel to illuminate the display to the Plus (+) and minus
2Press the + or – indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The display times out after 5 seconds and returns to the basic display.