Installation, Electrical Connection | Electrolux 2590-6 DT specification

Installation

Electrical Connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

WARNING – THIS APPLIANCE MUST BE EARTHED

The manufacturer declines any liability should these safety measures not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

Starting up and temperature regulation

Wash the inside of the appliance with lukewarm water with a little bicar- bonate of soda added (5ml to 0,5 litre of water). Do not use soap or deter- gent as the smell may linger. Dry the appliance thoroughly.

•When the refrigerator compartment door is opened, the internal lighting is switched on. The temperature control knob is located on the right hand side of the refrigerator compartment.

Setting “0”: Off.

Setting “1”: Hightest temperature, (warmest setting).

Setting “6” (end-stop) :Lowest temperature, (coldest setting).

The exact setting should be chosen keeping in mind that the temperature inside the refrigerator depends on:

-the quantity of food stored

Important!

The wires in the mains lead are coloured in accordance with the fol- lowing code:

Green and Yellow Earth

BlueNeutral

BrownLive

As the colours of the wires in the mains lead of this appliance may not

GREEN & YELLOW

13 AMP. FUSE

13 AMP

BROWN

BLUE

-how often the door is opened -ambient temperature

The temperatures in the refrigerator compartment and freezer compart- ment cannot be independently regulated.

If you want to freeze fresh food rapidly, select setting “6”, ensuring that the temperature in the refrigerator compartment does not drop below 0°C. You should reset the temperature control knob to setting “3” or “4”, if this does occur.

As soon as the fresh food placed in the freezer has frozen, return the tem- perature control knob to “3” or “4”.

correspond with the coloured mark- ings identifying the terminals in your plug, proceed as follows:

D207

CORD CLAMP

Important!

High ambient temperatures (e.g. on hot summer days) and a cold setting on the temperature regulator (position"5" to "6") can cause the compressor to

1.The wire coloured green and yellow must be connected to the terminal marked with the letter “E” or by the earth symbol or coloured green and yel- low.

2.The wire coloured blue must be connected to the terminal marked “N” or coloured black.

3.The wire coloured brown must be connected to the terminal marked “L” or coloured red.

4.Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

run continuously.

If this happens, turn the temperature regulator back to a warmer setting (position "3" to "4"). At this setting the compressor will be switched on and off as usual and automatic defrosting recommenced.

2590-6 DT specifications

The Electrolux 2590-6 DT is a powerful vacuum cleaner designed for efficient cleaning performance and user-friendly operation. This model stands out in the market due to its innovative features and advanced technologies that cater to diverse cleaning needs.

One of the main characteristics of the Electrolux 2590-6 DT is its powerful motor, which ensures strong suction power, allowing it to pick up various types of debris from different surfaces, including carpets, hardwood floors, and tiles. The adjustable suction settings enable users to customize the cleaning experience based on the surface being cleaned, ensuring optimal dirt pickup without damaging delicate materials.

Another highlight of the Electrolux 2590-6 DT is its multi-cyclonic technology. This feature allows for a better separation of dust and dirt, minimizing the chances of clogging the filter. As a result, the vacuum maintains consistent suction power, enhancing its overall efficiency. The vacuum's filtration system is also noteworthy, as it is designed to capture fine dust particles, making it an excellent choice for allergy sufferers. The HEPA filter ensures that the air expelled during cleaning is clean and fresh, contributing to a healthier home environment.

Convenience is a key focus of the Electrolux 2590-6 DT. It features a lightweight design, making it easy to maneuver around the house. The ergonomic handle ensures comfortable handling during extended cleaning sessions, while the compact design allows for easy storage in tight spaces.

Additionally, the Electrolux 2590-6 DT is equipped with a range of attachments that enhance its versatility. These include a dusting brush for delicate surfaces, an upholstery nozzle for furniture, and a crevice tool for those hard-to-reach areas. The vacuum also has a long power cord, minimizing the need for frequent outlet changes while cleaning larger spaces.

Overall, the Electrolux 2590-6 DT is a reliable and efficient choice for homeowners looking for a high-performance vacuum cleaner. Its combination of powerful suction, advanced filtration, lightweight design, and versatile attachments make it an excellent investment for maintaining a clean and healthy home. Whether tackling everyday messes or deep cleaning tasks, this vacuum is engineered to deliver outstanding results with ease.