Door Reversal

1.Disconnect it from the electricity supply.

2.Remove all loose items, including food. Store food in a cool place.

3.Make sure a towel or cloth is at the base of the product to prevent it from slipping.

4.Carefully lean the appliance backwards, resting the top on a stool, or something similar, at least 30cm (12") from the floor. (care must be taken not to allow the appliance wheels to slip).

Do not support the appliance on the rear ventilation grille or condenser.

5.Remove level adjuster (A) from base of product retaining small cup spacer which is located around the threaded portion of the adjuster.

6.Remove the foot / hinge assembly (B) by removing screws marked (C).

7.Remove the bottom door by lifting it upwards slightly and carefully sliding it down off the centre hinge pin (H).

8.Remove blanking plate (M) using a flat blade screwdriver.

9.Remove the centre hinge (H) by loosening screw (G) and removing totally screw (J). Remove the top door by carefully sliding it down off the upper hinge pin (P).

10.Unscrew the upper hinge pin (P) and transfer it to the opposite side of the cabinet.

11.Refit blanking plate (M) onto the opposite side of the cabinet.