electrolux 11
Door reversibility
The door of the appliance opens to the right. If you want to open the door to the left, do these steps before you install the appliance: 1. Loosen and remove the upper pin.
2.Remove the upper door.
3.Remove the spacer.
4.Loosen the middle hinge.
5. Remove the lower door.
6. Loosen and remove the lower pin.
On the opposite side:
1.Tighten the lower pin.
2.Install the lower door.
3.Tighten the middle hinge.
4.Install the spacer.
5.Install the upper door.
6.Tighten the upper pin.
Ventilation requirements
The airflow behind the appliance must be sufficient.
50 - min. 200 cm2
min.
200 cm2
Installing the appliance
Caution! Make sure that the mains cable can move freely.
Do these steps.
1.Install the appliance in the niche.
Push the appliance in the direction of the arrows (1) until the upper gap cover stops against the kitchen furniture. Make sure that the distance between the ap- pliance and the cupboard
Push the appliance in the direction of the arrows (2) against the cupboard on the opposite side of the hinge. Make sure that the clearance between the appli- ance and the cupboard is 4 mm.