Fitting the hood inside the cabinet
•Position the hood inside the cabinet, by sliding its brackets over the brackets fixed to the cabinet until the stop limit is reached.
•Run the power supply cable through the special slots in the cabinet.
•Secure the hood, using 2 screws (one per side) to fix the brackets together.
•If the hood is not perfectly in line with the lower edge of the cabinets at the side, its position can be adjusted by means of the internal fixing screws (see chapter "Fixing the brackets to the cooker hood" on the previous page).
•Fit the connection flange to the exhaust hose, which should have a suitable length and diameter for channelling fumes outside (Ducted version), or to the top of the cabinet (Filter version).
•Fix the connection flange to the exhaust outlet of the hood (snap- fastening).
When fastened correctly, the indicator on the flange should be aligned with the corresponding notch in the exhaust outlet.
•Complete the connection at the other end of the exhaust hose.
•Filter version only: Fit the charcoal filter(s) (see chapter "Maintenance and Care - Charcoal filter").
•Fit the grease filter(s) (see chapter "Maintenance and Care - Metal grease filter").
•Connect the hood to the electricity supply.
electrolux installation 19
2x | Ø 4 x 8 |
| GB |