Electrolux EFP 60520 Adjusting the cooker hood, Control Panel Opening the pull-out tray

Page 20

20electrolux installation

Adjusting the cooker hood

The position of the cooker hood may be adjusted.

Once the installation procedure is complete, you will find it useful to perform small adjustments with regard to the position of the hood inside the cabinet.

•Open the pull-out tray (see chapter

"Control Panel - Opening the pull-out tray").

•Remove the grease filter (see chapter "Maintenance and Care - Metal grease filter ").

• Loosen BUT DO NOT COMPLETELY
REMOVE the internal screws fixing
the right and left-hand adjustment	Ø 4 x 8
brackets in place.	Ø 4 x 8

•Adjust the position of the hood and re-tighten the screws.

GB

Image 20

Contents EFP 60310 EFP Page Good luck Contents Safety warnings Least Once a Month Extraction mode Extraction mode Recirculation modeDescription of the Appli- ance Coupling ringControl Panel Light switchLight switch switches the hood lamp on and off Maintenance and Care Removing the metal grease filterHand washing DishwasherFitting Charcoal filterReplacing the charcoal filter 20W max G4 Click Cleaning the hood Charcoal filter Type Model EFP Special accessoriesSomething Not Working Installation Dimensions in cmMax. absorb. power 165 W 290 W Technical DetailsElectrical connection Installation Preparing the cabinet Fixing the brackets to the cabinet 5 xBefore installing the hood 5 x 9,5Fitting the hood inside the cabinet Loosen but do not Completely Adjusting the cooker hoodControl Panel Opening the pull-out tray Installing the buffer strip Page Page LIB0006370 Ed /09