Electrolux EFP 60520, EFP 60310 user manual Installation Preparing the cabinet

Page 16

16electrolux installation

Installation

Warning! Do not connect the appliance to the mains until the installation is fully complete.

Preparing the cabinet

Ø 130mm

Ø 130mm

	189mm
Ø 130mm	min. 200mm		189mm
			189mm
		Ø 130mm	min. 200mm
		Ø 130mm
	min. 276
	max. 325		min. 276
			max. 325

First, check the dimensions given in the diagrams to make sure the cabinet is suitable for the cooker hood.

Make the holes required for the power GB supply cable and the exhaust hose.

Make the same type of holes in the top of the cabinet.

The cooker hood may be installed in a wider cabinet if the special Installation KIT is used (see "Special accessories" chapter).

Contact your nearest Authorised Assistance Centre to confirm the necessary details.

Image 16

Contents EFP 60310 EFP Page Good luck Contents Safety warnings Least Once a Month Extraction mode Extraction mode Recirculation modeDescription of the Appli- ance Coupling ringLight switch switches the hood lamp on and off Light switchControl Panel Maintenance and Care Removing the metal grease filterHand washing DishwasherReplacing the charcoal filter Charcoal filterFitting 20W max G4 Click Cleaning the hood Something Not Working Special accessoriesCharcoal filter Type Model EFP Installation Dimensions in cmMax. absorb. power 165 W 290 W Technical DetailsElectrical connection Installation Preparing the cabinet Fixing the brackets to the cabinet 5 xBefore installing the hood 5 x 9,5Fitting the hood inside the cabinet Control Panel Opening the pull-out tray Adjusting the cooker hoodLoosen but do not Completely Installing the buffer strip Page Page LIB0006370 Ed /09