18electrolux installation
Electrical connection GB (not for UK)
Safety warnings for the electrician Before connecting the appliance to the power supply, check that the voltage indicated on the rating plate corresponds to the mains power supply available. Appliances fitted with a plug can be connected to any standard power socket within easy access. Should it be necessary to provide a fixed connection, the hood must only be installed by an electrician authorised by the local electricity board. When installing, an omnipolar disconnector with a distance of at least 3 mm between contacts must be provided. Fixed connection of the appliance must only be carried out by an authorised electrician.
GREEN & YELLOW
|
| 5AT |
| ||
|
| |
|
| BROWN |
BLUE |
| CORD CLAMP |
|
|
Electrical connection for UK only
Safety warnings for the electrician Connect the hood to the mains supply via a double pole switch which has 3
mmminimum separation between the contacts.
The switch must be accessible at all times.
The following is valid in the United Kingdom only:
- the wire which is coloured green and yellow must be connected to the terminal which is marked with the
letter E or by the earth symbol ( 
), or coloured green or green and yellow;
- the wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black, -
- the wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.