Electrolux EFC 9418 user manual Maintenance and care, Cleaning the hood, Metal grease filter

Page 6

Maintenance and care

The hood must always be disconnected from the electricity supply before beginning any maintenance work.

Cleaning the hood

Clean the outside of the hood using a damp cloth and a solution of water and mild washing up liquid.

Never use corrosive, abrasive or flammable cleaning products or products containing bleach.

Never insert pointed objects in the motor’s protective grid.

Only ever clean the switch panel and filter grill using a damp cloth and mild washing up liquid.

It is extremely important to clean the unit and change the filters at the recommended intervals. Failure to do so will cause grease deposits to build up that could constitute a fire hazard.

Warning

Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. You are therefore strongly recommended to follow these instructions.

The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations.

Metal grease filter

• The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external extraction or internal re-circulation function. Attention: the metal grease filters must be removed and washed, either by hand or in the dishwasher, every four weeks.

Removing the metal grease filters

• Push it towards the back of the unit and then

pull it down and out.Fig. 3.

Fig. 3

Hand washing

 

Soak grease filters for about one hour in hot

 

water with a grease-loosening cleaner, then

￿

rinse off thoroughly with hot water. Repeat the

process if necessary. Refit the grease filters

when they are dry.

Dishwasher

Place grease filters in the dishwasher. Select

most powerful washing programme and highest

temperature, at least 65°C. Repeat the process.

Refit the grease filters when they are dry.

When washing the metal grease filter in the

dishwasher a slight discolouration of the filter

can occur, this does not have any impact on its

performance.

• Clean the inner housing using a hand hot

solution only(never use caustic detergents,

abrasive powders or brushes).

Image 6
Contents EFC Contents Safety warnings For the installer For the user Extraction mode Recirculation modeDescription of the appliance Control Panel EFC Correct ventilationMetal grease filter Maintenance and careCleaning the hood Removing the metal grease filtersCharcoal filter Changing the light bulbSpecial Accessories Technical SpecificationsWhat to do if Technical assistance service Service and Spare PartsEuropean Guarantee Guarantee ConditionsStandard guarantee conditions ExclusionsLocation InstallationUnpacking Electrical connection not for UKWall unit mounting Fig 10SPage Page Page Electrolux