Electrolux EFC 9418 user manual Wall unit mounting Fig, 10S

Page 12

Installation

Wall unit mounting - Fig. 6

Put the template onto the wall (1) and drill two Ø12mm holes (2).

Fit two hooks (3) on the drilled holes.

Remove the metal filters (4) and hang the hood on the hooks and adjust the position of the hood using the two screws on the bottom of the hooks (5).

Depending on the model, mark 2 or 4 points (6). Remove the hood and drill 2 or 4 Ø8mm holes on the marked points. Fit 2 or 4 Ø8mm wall dowels, Hang again the hood and fix the hood definitively with 2 or 4 screws 5X45 (7).

Fix the chimney support (8) with two screws 5 x 45 mm and two wall dowels on the wall close to the ceiling.

For the extraction version: Fit the connection ring (S) on the top of the hood with two screws Ø 3,5 x 6,5 mm (9S) then fit an axhausting pipe long enough to reach the outside (10S).

For the recirculation version: Fix definitively the deflector (K) on the top of the hood with two screws Ø 3,5 x 6,5 mm (9K).

Prepare the electric connection (11) (see relative chapter).

Fit the chimney (12) and fix it on

 

the chimney support with two

 

8

 

screws 3,0 x 9 mm (13).

 

13

 

The lower part of the chimney

 

 

 

must be slided down and inserted

13

 

 

on the housing on the upper part of

 

 

 

 

 

the hood (14).

 

11

12

Fit the two grids (15)

on both

 

 

sides of the chimney.

15

6

6

 

 

 

 

 

 

 

 

15

14

14

 

 

 

 

 

 

 

7

 

3

2

3

7

 

 

6

4

 

 

 

 

 

 

 

6

 

4

 

 

7

 

 

 

 

 

 

1

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

4

 

 

 

 

5

 

 

 

 

10S

 

 

9K

9K

 

 

 

 

 

 

 

 

 

 

K

 

￿￿

 

 

S

9S

 

 

9K

9K

 

9S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9S

 

9K

9K

 

 

 

 

 

 

 

Fig. 6

Image 12
Contents EFC Contents Safety warnings For the installerFor the user Extraction mode Recirculation modeDescription of the appliance Control Panel EFC Correct ventilationMaintenance and care Cleaning the hoodMetal grease filter Removing the metal grease filtersCharcoal filter Changing the light bulbSpecial Accessories Technical SpecificationsWhat to do if Technical assistance service Service and Spare PartsGuarantee Conditions Standard guarantee conditionsEuropean Guarantee ExclusionsInstallation UnpackingLocation Electrical connection not for UKWall unit mounting Fig 10SPage Page Page Electrolux

EFC 9418 specifications

The Electrolux EFC 9418 is a sophisticated under-cabinet range hood designed to enhance your kitchen experience by effectively removing smoke, steam, and odors generated during cooking. This model delivers efficiency combined with elegant aesthetics, making it a popular choice for modern kitchens.

One of the standout features of the EFC 9418 is its powerful extraction rate. With a maximum airflow capacity of up to 700 cubic meters per hour, it efficiently clears the air, ensuring your kitchen remains fresh and pleasant. This model utilizes advanced motor technology that optimizes its performance while minimizing noise levels, allowing you to enjoy a peaceful cooking environment.

The EFC 9418 comes with a built-in multi-functional control panel that includes several speed settings, allowing users to customize the extraction power according to their cooking needs. Whether you are simmering a delicate sauce or searing meat, you can adjust the hood for optimal performance. This user-friendly interface also includes a high-efficiency LED lighting system. This not only illuminates your cooking area but also provides energy savings compared to traditional lighting options.

Another noteworthy characteristic of the Electrolux EFC 9418 is its innovative filtration system, which consists of aluminum grease filters that are both effective and easy to clean. These filters are designed to capture airborne grease particles, ensuring that they do not recirculate into your kitchen environment. Additionally, the EFC 9418 has the option for a charcoal filter, allowing it to function efficiently in recirculating mode for kitchens where ducting is not possible.

In terms of design, the EFC 9418 features a sleek stainless-steel finish that complements contemporary kitchen aesthetics. The slim profile and compact design make it a versatile choice for various kitchen layouts. Moreover, the appliance’s easy installation process allows for seamless integration into your existing kitchen cabinetry.

Overall, the Electrolux EFC 9418 combines advanced technology, efficient performance, and stylish design, making it an ideal addition to any home kitchen. Its focus on user convenience and functional performance underscores Electrolux's commitment to quality and innovation in household appliances, ensuring that your cooking experience is both enjoyable and efficient.