Multi-Tab function 25
Multi-Tab function
This appliance is equipped with the
These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc...).
Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.
Select the
Once this function is selected it will remain active also for the following washing programmes.
With the selection of this function the inflow of rinse aid and salt from each re- spective supply container is automatically deactivated and also the displayed messages for salt and rinse aid are deactivated.
With the use of the
Once the programme is running, the
In this case you have to set a washing programme (and desired options) again. If the drying results are not satisfactory we recommend that you:
1.Fill up the rinse aid dispenser with rinse aid.
2.Activate the rinse aid dispenser.
3.Set the rinse aid dosage to position 2.
The activation/deactivation of the rinse aid can only be possible with the MULTITAB function active.
If you decide to turn back to the use of the standard detergent system we advise that you:
1.Deactivate the MULTITAB function
2.Fill up the dispensers for salt and rinse aid again.
3.Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes.