Electrolux FAVORIT 88010 user manual Water supply connections, Water inlet hose with safety valve

Page 38

38

Water supply connections

Connection to a cold water supply is advised. If connection is made to a hot water supply the maximum permissible temperature is 60°C. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot.

For making the connection itself, the coupling nut fitted to the machine's supply hose is designed to screw onto a 3/4" gas thread spout or to a purpose made quick- coupling tap such as the Press-block.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut.

The locknut must be correctly fitted to avoid water leaks.

(Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible). If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

DO NOT use connection hoses which have previously been used for an old appliance.

This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. This appliance complies with the applicable plumbing regulations.

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

•The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Favorit 88010 Dear Customer Contents Installation instructions Safety information Correct useInstallation General safetyChild safety Safety informationProduct description Control panel Up and down scrolling buttonsSymbols have the following meaning How to set the optionsSymbols indicate the options see chart DisplayPress OK / Start to confirm and enter submenu Option menu Option submenuOK / Start button Reset buttonSwitching on for the first time setting the language Fill the rinse aid dispenser First useSet the water softener Set the Multi-tab function see Multi-tab functionSetting Mmol/l Setting manuallySetting electronically Dishwasher is factory set at levelUse of dishwasher salt To fillOpen the container by pressing the release button a Use of rinse aidOnly use branded rinse aid for dishwashers By maxLoading cutlery and dishes Adjusting the dosage of rinse aidDaily use Open the door and slide out the baskets to load the dishes Lower basket Cutlery basketCutlery basket can be opened out Beer glasses and champagne glasses If necessary, the beer glass holders can be fol- ded upUpper basket Maximum height of the dishes Upper basket Lower basket Adjusting the height of the upper basketSpikes folded away more room for serv- ing dishes Use of detergent Raising / lowering the upper basketClose the lid and press until it locks in place This detergent will take effect during the prewash phaseFill with detergent Multi-Tab function Prewash Main wash Degree TypeProgramme description Final rinse DryingSelect and start a washing programme AnyEnd of the washing programme Cancel a delay start or a washing programme in progressInterrupt a washing programme in progress Unloading the dishwasher Care and cleaningCleaning the filters Cleaning the spray arms Clean all filters thoroughly under run- ning waterFrost precautions External cleaningInternal cleaning Prolonged periods of non-operationDisplay message and malfunction Possible cause and solution What to do ifWhat to do if Display message and malfunctionTechnical data Wash results are not satisfactoryFull load 12 standard place settings Hints for test institutesExample loading arrangements Levelling InstallationFixing to the adjacent units Water inlet hose with safety valve Water supply connectionsWater outlet hose connection End of the drain hose can be connected in the following waysThis could constitute a fire hazard through overheating Electrical connectionEnvironment concerns Packaging material Page Page Subject to change without notice

FAVORIT 88010 specifications

The Electrolux FAVORIT 88010 is a top-of-the-line built-in dishwasher that combines advanced technology with exceptional performance. Its sleek design is not only aesthetically pleasing but also functional, making it a perfect addition to any modern kitchen. With an impressive array of features, the FAVORIT 88010 is designed to enhance the dishwashing experience while ensuring energy efficiency.

One of the standout features of the FAVORIT 88010 is its innovative SensorLogic technology. This intelligent sensing system automatically adjusts the wash cycle based on the load size and soil level, optimizing water and energy consumption for both efficiency and effectiveness. This means users can trust that their dishes will come out impeccably clean every time, while also minimizing environmental impact.

In terms of capacity, the Electrolux FAVORIT 88010 can accommodate up to 13 place settings, making it perfect for family meals or entertaining guests. The flexible interior layout includes adjustable racks and foldable tines, allowing for the easy loading of larger pots, pans, and other items. The upper rack features a dedicated cutlery basket and specialized compartments to ensure that silverware is cleaned thoroughly and efficiently.

Noise reduction is another highlight of this model. With a quiet operation measured at just 44 dB, the FAVORIT 88010 ensures that users can enjoy their kitchen space without being disturbed by excessive noise during wash cycles. This makes it suitable for open-plan living areas where dishwashing might otherwise interrupt conversation or relaxation.

The dishwasher is also equipped with the QuickWash function, allowing users to clean lightly soiled dishes in record time—perfect for those unexpected gatherings when time is of the essence. Additionally, the ENERGY STAR rating indicates that the FAVORIT 88010 meets high standards for energy efficiency, making it a sustainable choice for environmentally conscious consumers.

Safety features such as the AquaControl system provide peace of mind by preventing water leakage, ensuring that the kitchen remains free from potential flooding. The self-cleaning filter system further enhances maintenance convenience, allowing users to enjoy their appliance without worrying about frequent cleaning.

In summary, the Electrolux FAVORIT 88010 merges cutting-edge technology, user-friendly design, and efficient performance to deliver an outstanding dishwashing solution. Its blend of features caters to diverse needs, making it an excellent choice for any household.
Top Page Image Contents