Electrolux FAVORIT 40310 manual Adjusting Rinse Aid Dosing

Page 13

	Operating Instructions
	Adjusting Rinse Aid Dosing
3	As the dishes are washed rinse aid is released from the dispenser into
	the wash water. The dose is factory set at 4, and can be adjusted from

1 to 6. Only change the setting if streaks, milky spots or dried on water marks are visible on glasses or crockery.

0 1. Open the door of the dishwasher.

2.Press the rinse aid compartment release button with your finger.

3. Fully open the rinse aid compartment lid.

4. Set the dose level.

5. Close the lid and press until it locks into place.

6.If rinse aid has run out, wipe up with a cloth.

13

Image 13

Contents Favorit Dear customer Tips on using the appliancePlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Installation, Connection and Placing into Operation Safety InstructionsChild Safety General SafetyCorrect Use Economical and Ecological Dishwashing DisposalDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Control Panel Prior to using for the first timeYour area Adjust the Water SoftenerFill with dishwasher salt Filling with Salt for the Water SoftenerRemain illuminated Open the door, remove the lower Rack Turning it anticlockwiseOugh rinsing, spot and streak free drying Filling with Rinse AidAge the appliance Fill with rinse aidAdjusting Rinse Aid Dosing Loading Cutlery and Dishes Daily UseNot be washed in the dishwasher Loading Cutlery Load large and heavily soiled dishes in the lower basket Loading Pans, Frying Pans Large PlatesFolded over to the left To ease the loading of large itemsAcross one another Folded across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses and Coffee Services Fill with detergent Filling with DetergentSpecial Advice General AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated DetergentType of Soiling Selecting the Wash Programme Programme TableChanging/Interrupting the Wash Programme Starting the Wash ProgrammeChanging the wash programme Switching Off the Dishwasher Care and CleaningEmptying the Dishwasher WasherCleaning the Filter What to do, if There are problems with the operation of the dish- washerDishes are still dirty Wash result is unsatisfactoryDishes are wet and dull There are dried water drops on the glasses and dishesTechnical Data Upper basket Lower basket with cutlery basket Sample loading arrangementsSee enclosed installation instructions Installing the DishwasherBuilt-Under Dishwasher Free-Standing AppliancesWork surface must be re-mounted Plinth on free-standing appliances is not adjustableWater Connection Connecting the DishwasherPermitted water pressure Connect the inlet hosePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG