Electrolux FAVORIT 40310 manual Water inlet hose with safety valve

Page 33

	Installation and Connection Instructions
3	The following section is only applicable to dishwashers that have a
	safety valve on the threaded hose fitting for the tap:
	Water inlet hose with safety valve
	After connecting the double-walled water inlet hose, the safety valve is
	next to the tap. Therefore the water inlet hose is only under pressure
	while the water is running. If the water inlet hose starts to leak during
	this operation, the safety valve cuts off the running water and the
	draining pump in the dishwasher is switched on.
1	Please take care when installing the water inlet hose:
	– The distance between the bottom
	edge of the safety value and the
	floor on which the dishwasher is
	standing must be at least 30 cm:
	– The electrical cable for the safety
	valve is in the double-walled water
	inlet hose. Do not immerse the
	water inlet hose or the safety valve
	in water.
	– If the water inlet hose or the safety
	valve is damaged, remove the
	mains plug immediately.
	– A water inlet hose with safety valve
	must only be replaced by your local
	Service Force Centre.
	– Place the water inlet hose in such a way that it is never higher than
	the bottom edge of the safety valve.

33

Image 33

Contents Favorit Dear customer Tips on using the appliancePlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Installation, Connection and Placing into Operation Safety InstructionsChild Safety General SafetyCorrect Use Economical and Ecological Dishwashing DisposalDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Control Panel Prior to using for the first timeYour area Adjust the Water SoftenerFill with dishwasher salt Filling with Salt for the Water SoftenerRemain illuminated Open the door, remove the lower Rack Turning it anticlockwiseOugh rinsing, spot and streak free drying Filling with Rinse AidAge the appliance Fill with rinse aidAdjusting Rinse Aid Dosing Daily Use Loading Cutlery and DishesNot be washed in the dishwasher Loading Cutlery Load large and heavily soiled dishes in the lower basket Loading Pans, Frying Pans Large PlatesFolded over to the left To ease the loading of large itemsAcross one another Folded across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses and Coffee Services Fill with detergent Filling with DetergentGeneral Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated DetergentType of Soiling Selecting the Wash Programme Programme TableStarting the Wash Programme Changing/Interrupting the Wash ProgrammeChanging the wash programme Switching Off the Dishwasher Care and CleaningEmptying the Dishwasher WasherCleaning the Filter What to do, if There are problems with the operation of the dish- washerDishes are still dirty Wash result is unsatisfactoryDishes are wet and dull There are dried water drops on the glasses and dishesTechnical Data Upper basket Lower basket with cutlery basket Sample loading arrangementsSee enclosed installation instructions Installing the DishwasherBuilt-Under Dishwasher Free-Standing AppliancesWork surface must be re-mounted Plinth on free-standing appliances is not adjustableWater Connection Connecting the DishwasherPermitted water pressure Connect the inlet hosePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG