|
|
|
| Set the water softener | 13 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Water hardness |
| Adjusting the water hardness | Use of salt | ||
|
|
|
|
| setting |
|
|
| Clarke | °TH | mmol/l | manually | electronically |
|
|
| 23 - 27 | 33 - 39 | 3,3 - 3,9 | 2 | level 5 | yes |
|
| 18 - 22 | 26 - 32 | 2,61 - 3,2 | 1 | level 4 | yes |
|
| 13 - 17 | 19 - 25 | 1,9 - 2,5 | 1 | level 3 | yes |
|
| 5 - 12 | 7 - 18 | 0,71 - 1,8 | 1 | level 2 | yes |
|
| < 5 | < 7 | < 0,7 | 1 | level 1 | no |
|
The water softener must be set in both ways: manually, using the water hardness dial and electronically.
Setting manually
The dishwasher is factory set at position 2.
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to posi- tion 1 or 2 (see table).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
1.Press the On/Off button. The dishwasher must be in setting mode.
2.Press simultaneously and keep pressed buttons B and C, until the lights of buttons A, B and C start flashing.
3.Press button A, the lights of buttons B and C turn off while the light of button A goes on flashing. In the digital display is visible the current level.
Examples:
displayed = level 5 displayed = level 10