Electrolux FAVORIT 50871 Environment concerns, Electrical connection, Packaging material

Page 39

Environment concerns 39

Electrical connection

WARNING!

Safety standards require the appliance to be earthed.

Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed.

The fuse rating is also to be found on the rating plate.

Always plug the mains plug into a correctly installed shockproof socket. Multi-way plugs, connectors and extension cables must not be used.

This could constitute a fire hazard through overheating.

If necessary, have the domestic wiring system socket replaced. In case that the electrical cable has to be replaced, contact your local Service Force centre.

The plug must be accessible after the appliance has been installed. Never unplug the appliance by pulling on the cable. Always pull the plug.

The manufacturer accepts no liability for failure to observe the above safety pre- cautions.

Environment concerns

Packaging material

The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities.

WARNING!

When a unit is no longer being used:

Pull the plug out of the socket.

Cut off the cable and plug and dispose of them.

Dispose of the door catch. This prevents children from trapping themselves inside and endangering their lives.

Image 39
Contents Favorit Dear Customer Contents Guarantee/Customer Service Correct use Safety informationGeneral safety Child safetyInstallation Safety information Product description Product description Control panel Indicator lightsSetting mode Function buttonsDigital display indicates Set the water softener First useSetting manually Setting electronicallyExamples To fill Filling with dishwasher saltOnly use branded rinse aid for dishwashers Filling with rinse aidAdjusting the dosage of rinse aid Daily useLoading cutlery and dishes Open the door and slide out the baskets to load the dishes Cutlery basket Lower basketUpper basket Adjusting the height of the upper basket Raising / lowering the upper basket Use of detergentDetergent tablets Fill with detergentActivation/deactivation of the Multi-Tab function Multi-tab functionActivation/deactivation of the rinse aid dispenser Energy kWh Water litres Washing programmesSetting and starting the programme with delay start Cancelling the delay start and / or a washing programmeSelect and start a washing programme Unloading the dishwasher Interrupt a washing programme in progressEnd of the washing programme Cleaning the filters Care and cleaningCleaning the spray arms External cleaningInternal cleaning Moving the machine Frost precautionsSomething not working Prolonged periods of non-operationSomething not working Wash results are not satisfactory Hints for test institutes Technical dataExample loading arrangements Installation Fitting under a counter kitchen worktop or sinkProceed as follows Levelling Water supply connections Locknut must be correctly fitted to avoid water leaks Water inlet hose with safety valve Water to syphon back into the machine Water outlet hose connectionEnvironment concerns Electrical connectionPackaging material Environment concerns Exclusions Guarantee/Customer ServiceStandard guarantee conditions Service and Spare PartsCustomer Care European GuaranteeAlbania +35 Hamm Page Page Page Subject to change without notice