Electrolux FAVORIT 50871 Adjusting the dosage of rinse aid, Daily use, Loading cutlery and dishes

Page 16

16Adjusting the dosage of rinse aid

Adjusting the dosage of rinse aid

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= max- imum dosage).

The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Daily use

•Check if it's necessary to refill with dishwasher salt or rinse aid.

•Load cutlery and dishes into the dishwasher.

•Fill with dishwasher detergent.

•Select a wash programme suitable for the cutlery and dishes.

•Start the wash programme.

Loading cutlery and dishes

Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.

•Before loading the dishes, you should:

–Remove all left over food and debris.

–Soften remnants of burnt food in pans

Image 16

Contents Favorit Dear Customer Contents Guarantee/Customer Service Safety information Correct useChild safety General safetyInstallation Safety information Product description Product description Indicator lights Control panelFunction buttons Setting modeDigital display indicates First use Set the water softener Setting electronically Setting manually Examples Filling with dishwasher salt To fillFilling with rinse aid Only use branded rinse aid for dishwashersDaily use Adjusting the dosage of rinse aidLoading cutlery and dishes Open the door and slide out the baskets to load the dishes Lower basket Cutlery basketUpper basket Adjusting the height of the upper basket Use of detergent Raising / lowering the upper basketFill with detergent Detergent tabletsMulti-tab function Activation/deactivation of the Multi-Tab functionActivation/deactivation of the rinse aid dispenser Washing programmes Energy kWh Water litresCancelling the delay start and / or a washing programme Setting and starting the programme with delay startSelect and start a washing programme Interrupt a washing programme in progress Unloading the dishwasherEnd of the washing programme Care and cleaning Cleaning the filtersExternal cleaning Cleaning the spray armsInternal cleaning Frost precautions Something not workingProlonged periods of non-operation Moving the machineSomething not working Wash results are not satisfactory Technical data Hints for test institutesExample loading arrangements Fitting under a counter kitchen worktop or sink InstallationProceed as follows Water supply connections LevellingLocknut must be correctly fitted to avoid water leaks Water inlet hose with safety valve Water outlet hose connection Water to syphon back into the machineElectrical connection Environment concernsPackaging material Environment concerns Guarantee/Customer Service Standard guarantee conditionsService and Spare Parts ExclusionsEuropean Guarantee Customer CareAlbania +35 Hamm Page Page Page Subject to change without notice