3 in 1 function
This appliance is equipped with the 3 in 1 function, that allows the use of the ‘3 in 1’ combi detergent tablets.
These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose (‘3 in 1’, ‘4 in 1’, ‘5 in 1’ etc...)
Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.
Once this function is selected it will remain active also for the following washing programmes.
With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the displayed messages for salt and rinse aid are deactivated.
Select the 3 in 1 function before the start of a washing programme.
With the use of the 3 in 1 function, the cycle durations may change. In this case, in the display, the indication of the time is automatically updated.
Once the programme is running, the 3 in 1 function can NO longer be changed. If you want to exclude the 3 in 1 function you have to cancel the programme setting and then deactivate the 3 in 1 function.
In this case you have to set a washing programme (and desired options) again.
daily use electrolux 25
If the drying results are not satisfactory we recommend that you:
1.Fill up the rinse aid dispenser with rinse aid.
2.Activate the rinse aid dispenser.
3.Set the rinse aid dosage to position 2.
●The activation/deactivation of the rinse aid dispenser can only be possible with the 3 in 1 function active.
If you decide to turn back to the use of the standard detergent system we advise that you:
1.Deactivate the 3 in 1 function.
2.Fill up the dispensers for salt and rinse aid again.
3.Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes.
4.Adjust the water hardness setting according to the hardness of the water in your area.
5.Adjust the rinse aid dosage.