Malfunction
The programme does not start
Once these checks have been carried out; switch on the appliance and close the dishwasher door.
The programme will continue from the point at which it was interrupted.
If the message reappears in the display contact the Service Force Centre.
For other messages not described in the chart, please contact your Service Force Centre.
Contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.).
This information can be found on the rating plate located on the side of the dishwasher door.
So that you always have these numbers at hand, we recommend you to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .
something not working electrolux 33
Possible cause and solution
●The dishwasher’s door has not been properly closed. (Message PLEASE CLOSE DOOR displayed)
Close the door.
●The main plug is not plugged in. Insert the main plug.
●The fuse has blown out in the household fuse box.
Replace the fuse.
●Delay start has been set.
If dishes are to be washed immediately, cancel the delay start.