Electrolux ESL 68500 user manual Something not working, Displayed message Malfunction

Page 32

32 electrolux something not working

Something not working

The dishwasher will not start or stops during operation.

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer.

Open the door and carry out the following suggested corrective actions.

Displayed message and

malfunction

●message OPEN THE TAP displayed,

●point-shaped optical signal is flashing,

The dishwasher does not fill with water

●message DRAIN BLOCKED displayed,

●point-shaped optical signal is flashing,

The dishwasher will not drain

● appears in the display,

●point-shaped optical signal is flashing,

Anti-flood device is activated

Possible cause and solution

●The water tap is blocked or furred with limescale.

Clean the water tap.

●The water tap is turned off. Turn the water tap on.

●The filter (where present) in the threaded hose fitting at the water inlet valve is blocked.

Clean the filter in the threaded hose.

●The water inlet hose has not been correctly laid or it is bent or squashed. Check the water drain hose connection.

●The sink spigot is blocked. Clean out the sink spigot.

●The water drain hose has not been correctly laid or it is bent or squashed. Check the water drain hose connection.

●Close the water tap and contact your local Service Force Centre.

Remember to switch off the appliance before carrying out any corrective action.

The flashing of the point-shaped optical signal on the floor beneath the dishwasher’s door will not be visible if the appliance has been installed higher up with a furniture door mounted flush.

Image 32

Contents Dishwasher ESL We were thinking of you Welcome to the world of Electrolux Contents Correct use Safety informationGeneral safety Child safety InstallationProduct description Control panel How to set the options Switching on for the first time setting the languageOption menu Option submenuDisplay SymbolsSymbols have the following meaning Setting manually Dishwasher is factory set at position First useUse Salt Setting electronicallyOption menu Settings Water hardness Filling with dishwasher salt To fillFilling with rinse aid Electrolux first use Daily use Loading cutlery and dishesElectrolux daily use Lower basket Cutlery basket Daily use electrolux Upper basket To move to the higher position proceed as follows Adjusting the height of the upper basketMaximum height of the dishes in the lower basket Detergent tablets Use of detergentFill with detergent 1 function Cancel a washing programme or a delay start in progress Set and start a washing programmeEnd of the washing programme Unloading the dishwasherWashing programmes ProgrammeDegree Soil Type of loadWashing programmes information Care and cleaning Cleaning the filtersExternal cleaning Internal cleaningFrost precautions Never try to remove the spray armsDisplayed message Malfunction Possible cause and solutionSomething not working Programme does not start Dishes are not clean Dishes are wet and dull Wash results are not satisfactoryTechnical data Water Consumption Litres Consumption values ProgrammeProgramme Duration Minutes Energy Consumption KWh Full load 12 standard place settings Hints for test institutesInstallation Fixing to the adjacent unitsLevelling Water supply connectionsWater inlet hose with safety valve Water outlet hose connection Installation electrolux Old appliance Environment concernsPackaging material Guarantee/Customer Service Standard guarantee conditionsService and Spare Parts ExclusionsEuropean guarantee Customer CareAlbania Belgique/België/Belgien Electrolux Page 117989 78/0-00-03022007