Electrolux ESL 4126 Installation instructions, Building-in, Levelling, Water supply connections

Page 19

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Building-in

This dishwasher is designed to be fitted under a kitchen counter or worksurface.

Attention!

Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel.

No further openings for the venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.

The dishwasher incorporates adjustable feet to allow the adjustment of the height.

During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

When inserting the machine, ensure that the water inlet hose, the drain hose and the supply cable are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Fixing to the adjacent units

The dishwasher must be secured against tilting. Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall).

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used with another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents S h w a s h e r Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Digital display indicates Audible signalsDeactivation/activation of the audible signals Control panelWater softener Prior to using for the first timeSetting manually Setting electronicallyFilling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketUpper basket Cutlery basketFill with detergent Adjusting the height of the upper basketUse of detergent To move to the higher position proceed as followsCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Starting a washing programme Prolonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsFault Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard Guarantee Conditions European GuaranteeFixing to the adjacent units Installation instructionsBuilding-in LevellingProceed as follows Water outlet hose connectionElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveCup racks position a Hints for test centresPage Page Electrolux plc

ESL 4126 specifications

The Electrolux ESL 4126 is a highly efficient built-in dishwasher that combines sleek design with advanced technology, making it a popular choice for modern kitchens. This model is specifically designed to complement any kitchen decor while providing incredible cleaning performance and energy efficiency.

One of the main features of the ESL 4126 is its impressive capacity. With space for up to 13 place settings, it is ideal for families or those who enjoy entertaining. The adjustable upper basket and foldable plate racks allow for greater flexibility in loading, accommodating various dish sizes and shapes without compromising cleaning effectiveness.

The ESL 4126 is equipped with multiple wash programs, catering to all types of dishwashing needs. These include intensive wash, eco wash, and quick wash settings. The intensive program is particularly useful for heavily soiled pots and pans, ensuring a thorough clean, while the eco wash is designed to save energy and water without sacrificing performance. The quick wash option is perfect for those who need clean dishes in a hurry, allowing users to enjoy their time without worrying about the cleanup.

The dishwasher features Electrolux's innovative AirDry technology. This unique system allows the dishwasher to automatically open its door during the final rinse cycle, promoting better air circulation and ensuring that dishes come out drier and perfect every time. This not only enhances drying performance but also reduces the need for additional drying cycles, resulting in lower energy consumption.

In terms of noise level, the ESL 4126 operates at a quiet 44 dB, making it one of the quieter models on the market. This feature is particularly advantageous for open-plan living spaces, allowing users to run their dishwasher at any time without disturbing the household.

Another characteristic that sets the ESL 4126 apart is its energy efficiency rating. It operates at a commendable A+ rating, ensuring that users can maintain a sustainable lifestyle while enjoying optimal cleaning results. Furthermore, the dishwasher is designed to minimize water usage, with a consumption of just 9.9 liters per cycle, making it an environmentally friendly option.

In conclusion, the Electrolux ESL 4126 dishwasher is an excellent choice for those seeking a reliable, efficient, and stylish cleaning appliance. Its combination of advanced features, user-friendly design, and energy-saving technologies makes it a standout solution for modern kitchens.
Top Page Image Contents