Electrolux ESL 4126 manual Water outlet hose connection, Electrical connection, Proceed as follows

Page 20

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

Warning!

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.

20

Image 20
Contents S h w a s h e r Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Audible signals Deactivation/activation of the audible signalsControl panel Digital display indicatesPrior to using for the first time Setting manuallySetting electronically Water softenerAdjusting the dose Filling with dishwasher saltRinse aid Filling with rinse aidDaily use Loading cutlery and dishesLower basket Are of limited suitabilityCutlery basket Upper basketAdjusting the height of the upper basket Use of detergentTo move to the higher position proceed as follows Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes Starting a washing programme Maintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard Guarantee ConditionsEuropean Guarantee ExclusionsInstallation instructions Building-inLevelling Fixing to the adjacent unitsWater outlet hose connection Electrical connectionGreen and Yellow Earth Blue- Neutral Brown- Live Proceed as followsHints for test centres Cup racks position aPage Page Electrolux plc

ESL 4126 specifications

The Electrolux ESL 4126 is a highly efficient built-in dishwasher that combines sleek design with advanced technology, making it a popular choice for modern kitchens. This model is specifically designed to complement any kitchen decor while providing incredible cleaning performance and energy efficiency.

One of the main features of the ESL 4126 is its impressive capacity. With space for up to 13 place settings, it is ideal for families or those who enjoy entertaining. The adjustable upper basket and foldable plate racks allow for greater flexibility in loading, accommodating various dish sizes and shapes without compromising cleaning effectiveness.

The ESL 4126 is equipped with multiple wash programs, catering to all types of dishwashing needs. These include intensive wash, eco wash, and quick wash settings. The intensive program is particularly useful for heavily soiled pots and pans, ensuring a thorough clean, while the eco wash is designed to save energy and water without sacrificing performance. The quick wash option is perfect for those who need clean dishes in a hurry, allowing users to enjoy their time without worrying about the cleanup.

The dishwasher features Electrolux's innovative AirDry technology. This unique system allows the dishwasher to automatically open its door during the final rinse cycle, promoting better air circulation and ensuring that dishes come out drier and perfect every time. This not only enhances drying performance but also reduces the need for additional drying cycles, resulting in lower energy consumption.

In terms of noise level, the ESL 4126 operates at a quiet 44 dB, making it one of the quieter models on the market. This feature is particularly advantageous for open-plan living spaces, allowing users to run their dishwasher at any time without disturbing the household.

Another characteristic that sets the ESL 4126 apart is its energy efficiency rating. It operates at a commendable A+ rating, ensuring that users can maintain a sustainable lifestyle while enjoying optimal cleaning results. Furthermore, the dishwasher is designed to minimize water usage, with a consumption of just 9.9 liters per cycle, making it an environmentally friendly option.

In conclusion, the Electrolux ESL 4126 dishwasher is an excellent choice for those seeking a reliable, efficient, and stylish cleaning appliance. Its combination of advanced features, user-friendly design, and energy-saving technologies makes it a standout solution for modern kitchens.