Electrolux ESL 4126 Filling with dishwasher salt, Rinse aid, Filling with rinse aid, To fill

Page 7

Filling with dishwasher salt

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the complete washing programmes.

This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.

2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).

3. Using the funnel provided,

pour in the salt until the container is full.

4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5. Replace on the cap tightly turning it clockwise until it stops with a click.

The salt container will require topping up periodically. You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid

1.Open the container by pressing the release button (A).

2.Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max".

Ensure that the lid is closed after every refill.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position

6 maximum dosage).

The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Top up the rinse aid when the indicator light on the control panel illuminates.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents S h w a s h e r Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Digital display indicates Audible signalsDeactivation/activation of the audible signals Control panelWater softener Prior to using for the first timeSetting manually Setting electronicallyFilling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketUpper basket Cutlery basketFill with detergent Adjusting the height of the upper basketUse of detergent To move to the higher position proceed as followsCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Starting a washing programme Prolonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsFault Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard Guarantee Conditions European GuaranteeFixing to the adjacent units Installation instructionsBuilding-in LevellingProceed as follows Water outlet hose connectionElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveCup racks position a Hints for test centresPage Page Electrolux plc

ESL 4126 specifications

The Electrolux ESL 4126 is a highly efficient built-in dishwasher that combines sleek design with advanced technology, making it a popular choice for modern kitchens. This model is specifically designed to complement any kitchen decor while providing incredible cleaning performance and energy efficiency.

One of the main features of the ESL 4126 is its impressive capacity. With space for up to 13 place settings, it is ideal for families or those who enjoy entertaining. The adjustable upper basket and foldable plate racks allow for greater flexibility in loading, accommodating various dish sizes and shapes without compromising cleaning effectiveness.

The ESL 4126 is equipped with multiple wash programs, catering to all types of dishwashing needs. These include intensive wash, eco wash, and quick wash settings. The intensive program is particularly useful for heavily soiled pots and pans, ensuring a thorough clean, while the eco wash is designed to save energy and water without sacrificing performance. The quick wash option is perfect for those who need clean dishes in a hurry, allowing users to enjoy their time without worrying about the cleanup.

The dishwasher features Electrolux's innovative AirDry technology. This unique system allows the dishwasher to automatically open its door during the final rinse cycle, promoting better air circulation and ensuring that dishes come out drier and perfect every time. This not only enhances drying performance but also reduces the need for additional drying cycles, resulting in lower energy consumption.

In terms of noise level, the ESL 4126 operates at a quiet 44 dB, making it one of the quieter models on the market. This feature is particularly advantageous for open-plan living spaces, allowing users to run their dishwasher at any time without disturbing the household.

Another characteristic that sets the ESL 4126 apart is its energy efficiency rating. It operates at a commendable A+ rating, ensuring that users can maintain a sustainable lifestyle while enjoying optimal cleaning results. Furthermore, the dishwasher is designed to minimize water usage, with a consumption of just 9.9 liters per cycle, making it an environmentally friendly option.

In conclusion, the Electrolux ESL 4126 dishwasher is an excellent choice for those seeking a reliable, efficient, and stylish cleaning appliance. Its combination of advanced features, user-friendly design, and energy-saving technologies makes it a standout solution for modern kitchens.
Top Page Image Contents