Electrolux ESI 602 manual Maintenance and cleaning

Page 10

Maintenance and cleaning

Internal cleaning

Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend the use of

Finish Dishwasher Cleaner

every

3 months or run a 65°C wash without dishes using detergent.

 

Regular use of

Finish Dishwasher Cleaner

cleans

inaccessible parts, eliminates unpleasant food odours and

 

helps prevent the build-up of limescale.

 

 

Cleaning the central filter

(After each wash)

Scraps of food may accumulate in the drain filter (A) and should be removed by rinsing the filter under running water.

To remove the drain filter

- simply pull it out by the handle.

Once cleaned, refit the filter by pushing it back to its original position until it engages.

The dishwasher must not be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results.

Cleaning the filters is vital to ensure correct operation of the machine.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....).

Prolonged periods of non-operation

If you are not using the machine for any period of time you are advised to:

A

MA04

MA19

1.Unplug the appliance and then turn off the water.

2.Fill the rinse aid dispenser.

3.Leave the door ajar to prevent the formation of any unpleasant smells.

4.Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature

Cleaning the large filter

(Every week)

If necessary clean the large filter (B) on both sides under running water, using a brush.

To remove the large filter

1.Remove the spray arm by pulling it upwards on one side.

2.Turn the column (C) anticlockwise by 90° and then slide out the filter.

3.Once cleaned refit it following the above instructions in reverse order.

4.Ensure the filter is in its original position, the handle of the drain filter should be pointing towards the front of the appliance.

is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it.

Moving the machine

If you have to move the machine (moving house etc....

):

1.Unplug it.

2.Turn the water tap off.

3.Remove the water inlet and discharge hoses.

4.Pull the machine out together with the hoses. Avoid over tilting the machine during transportation.

90°

B

C

MA05

MA21

MA20

MA18

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents S h w a s h e r Contents Important safety information Hints and tipsControl panel Description of the applianceBefore use Setting the water softenerTo adjust the water softener Filling with saltFilling with rinse aid Adjusting the doseRinse aid Use of detergentUsing your appliance Washing programmes Operating sequence Maintenance and cleaning Something not working Guarantee Conditions Service and Spare PartsCustomer Care Department Water outlet hose connection Installation instructionsWater supply connections Remove all packaging before positioning the machineElectrical connection Nser Hints for test centresTest standard Electrolux Household Appliances Limited

ESI 602 specifications

The Electrolux ESI 602 is a standout dishwasher, designed to deliver exceptional cleaning performance while enhancing your kitchen's efficiency. This model epitomizes modern appliance technology, combining innovative features with user-friendly controls to cater to the needs of contemporary households.

One of the defining characteristics of the Electrolux ESI 602 is its impressive energy efficiency. Rated with an A++ energy classification, this dishwasher not only helps in reducing your household's electricity consumption but also contributes to a more sustainable lifestyle. This is further complemented by a low water consumption rate, ensuring that the appliance is economical while still providing thorough cleaning.

In terms of capacity, the ESI 602 can accommodate up to 12 place settings, making it an ideal choice for families or individuals who frequently entertain guests. The adjustable racking system allows for the flexible positioning of items, making it easy to fit in larger dishes or specialized utensils. The top basket is designed to be height adjustable, providing additional convenience depending on your loading needs.

The technology integrated into the Electrolux ESI 602 is designed with the user in mind. The OptiSense feature automatically adjusts the wash cycle based on the load size, optimizing both water and energy usage. This ensures that every wash is tailored to the specific needs of the load while maintaining excellent cleaning results.

Another notable feature is the Silent System. As the name suggests, it significantly reduces noise during operation, making the Electrolux ESI 602 one of the quieter dishwashers on the market. This is particularly beneficial in open-plan living spaces or during night-time operation.

The ESI 602 comes equipped with a range of washing programs, including Intensive, Eco, and Quick options. Each program is designed to handle different types of soiling and load sizes efficiently. The Delay Start function also allows users to set the dishwasher to begin at a more convenient time, accommodating busy schedules.

With its sleek design and stainless steel finish, the Electrolux ESI 602 fits seamlessly into any kitchen décor, offering both aesthetic appeal and practicality. The easy-to-use control panel, with simple buttons and indicators, makes programming straightforward for users of all ages.

The Electrolux ESI 602 is a powerful and efficient dishwasher, combining innovative technology with thoughtful design to make dishwashing a seamless task in any household.
Top Page Image Contents