Electrolux ESF 66814 user manual USE of Dishwasher Salt, Manual Adjustment, Electronic Adjustment

8electrolux

Water hardness

mg/l	ppm	mmol/l
< 70	< 70	< 0.7

1) No use of salt required.

You must set the water softener man- ually and electronically.

MANUAL ADJUSTMENT

The appliance is set at the factory at position 2.

1.Remove the lower basket.

2.Turn the water hardness dial to position 1 or 2 (refer to the chart).

3. Put back the lower basket.

ELECTRONIC ADJUSTMENT

The appliance is factory set at level 5.

USE OF DISHWASHER SALT

Water hardness setting

manually	electronically
1	11)

1.Switch on the appliance. Make sure that the appliance is in setting mode.

2.Press and hold button (4) and button (5) at the same time until the indicators of buttons (3), (4) and (5) flash.

3.Release button (4) and button (5).

4.Press button (3),

•The indicators of button (4) and but- ton (5) go off.

•The indicator of button (3) continues to flash.

•The acoustic signals sound.

•The display shows the setting of the

water softener (example: and you hear five acoustic signals = level 5).

5.Press button (3) one time to increase the water softener level by one step. Continue to press button (3) until the re- quired water softener level is achieved.

6.Switch off the appliance to confirm.

Caution! Only use dishwasher salt. Types of salt that are not suitable for dishwashers cause damage to the water softener.

Caution! Grains of salt and salty water on the bottom of the appliance can cause corrosion. Fill the appliance with salt before you start a washing program.

Filling the salt container

1.Turn the cap counterclockwise to open the salt container.

2.Fill the salt container with 1 litre of water (only the first operation).

3.Use the funnel to fill the salt container with salt.

4.Remove the salt around the opening of the salt container.

5.Turn the cap clockwise to close the salt container.