Electrolux 89020 I user manual Anti-flood device is activated, Wash results are not satisfactory

Page 26

26What to do if…

Display message and malfunction

intermitted audible signal

appears in the display

Anti-flood device is activated

The programme does not start.

Possible cause and solution

Close the water tap and contact your local Service Force Centre.

The dishwasher’s door has not been properly closed. Close the door.

The main plug is not plugged in. Insert the main plug.

The fuse has blown out in the household fuse box.

Replace the fuse.

Delay start has been set.

If dishes are to be washed immediately, cancel the delay start.

Once these checks have been carried out, switch on the appliance: the programme will continue from the point at which it was interrupted.

If the malfunction or fault code reappears contact the Service Force Centre.

For other fault codes not described in the above chart, please contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.). This information can be found on the rating plate located on the side of the dishwasher door.

So that you always have these numbers at hand, we recommend you to make a note of them here:

Mod. : . . . . . . . . . . . . . . . . . . . . . . .

PNC :. . . . . . . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . . . . . . . .

The wash results are not satisfactory

The dishes are not clean

The dishes are wet and dull

The wrong washing programme has been se- lected.

The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.

The spray arms do not rotate freely due to incorrect arrangement of the load.

The filters in the base of the washing com- partment are dirty or incorrectly positioned.

Too little or no detergent has been used.

Where there are limescales deposits on the dishes; the salt container is empty or the in- correct level of the water softener has been set.

The drain hose connection is not correct.

The salt container cap is not properly closed.

Rinse aid was not used.

The rinse aid dispenser is empty.

Image 26
Contents Favorit 89020 Contents Child safety Safety informationGeneral safety Safety informationInstallation Product descriptionUp and down scrolling buttons + Control panelInternal light Display Symbols indicate the options see chartSymbols have the following meaning Option buttonOK / Start button Reset buttonSwitching on for the first time setting the language Option menuFirst use Setting the water softenerFirst use Use of saltUse of dishwasher salt Setting manuallySetting electronically Dishwasher is factory set at levelUse of rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidDaily use Are of limited suitability Lower basketOpen the door and slide out the baskets to load the dishes Cutlery basket Cutlery basketBeer glasses Loading cutlery and dishesUse the thumbs to push the support back Upper basket Adjusting the height of the upper basket Maximum height of the dishes Upper basket Lower basketOpen the lid Use of detergentFill with detergent Multitab function Detergent tabletsAdjust the rinse aid dosage Washing programmesDegree Night Cycle programmeWashing programmes LoadInterrupt a washing programme in progress Cancel a delay start or a washing programme in progressSelect and start a washing programme End of the washing programmeUnloading the dishwasher Care and cleaningCleaning the filters Hot dishes are sensitive to knocksInternal cleaning Cleaning the spray armsExternal cleaning Care and cleaningProlonged periods of non-operation Frost precautionsWhat to do if… Moving the machineAnti-flood device is activated Wash results are not satisfactoryTechnical data Technical dataInstallation Fixing to the adjacent unitsLevelling Water inlet hose with safety valveWater connection Water supply connectionsWater outlet hose connection Packaging material Electrical connectionEnvironment concerns Electrical connectionPage 117958641-00-122008