Daily use 11
This occurs only at the start and at the end of the washing programme; during the running of the programme the indication for rinse aid refilling is not active.
Adjusting the dosage of rinse aid
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage). The dose is factory set in position 4.
Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.
Daily use
•Check if it's necessary to refill with dishwasher salt or rinse aid.
•Load cutlery and dishes into the dishwasher.
•Fill with dishwasher detergent.
•Select a wash programme suitable for the cutlery and dishes.
•Start the wash programme.
Loading cutlery and dishes
Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.
•Before loading the dishes, you should:
–Remove all left over food and debris.
–Soften remnants of burnt food in pans
•When loading the dishes and cutlery, please note:
–Dishes and cutlery must not impede the rotation of the spray arms.
–Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base.
–Dishes and items of cutlery must not lie inside one another, or cover each other.
–To avoid damage to glasses, they must not touch.
–Lay small objects in the cutlery basket.