Multitab function | 19 |
2. Fill the detergent dispenser (1) with deter- |
|
gent. The marking indicates the dosing |
|
levels: |
|
20 = approximately 20 g of detergent |
|
30 = approximately 30 g of detergent. |
|
3. All programmes with prewash need an ad- |
|
ditional detergent dose (5/10 g) that must |
|
be placed in the prewash detergent cham- |
|
ber (2). |
|
This detergent will take effect during the |
|
prewash phase. |
|
4. When using detergent tablets, place the tablet in compartment (1)
5. Close the lid and press until it locks in place.
Detergent tablets
Detergent tablets from different manufac- tures dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing pro- grammes. Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent re- siduals.
Multitab function
This appliance is equipped with the "Multitab function", that allows the use of the "Multitab " combi detergent tablets.
These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc...).
Check whether these detergents are suitable for your water hardness. See the manufac- turers instructions.
Select the "Multitab function " before the start of a washing programme.
Once this function is selected it will remain active also for the following washing pro- grammes.
With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the displayed messages for salt and rinse aid are deactivated.
With the use of the "Multitab function", the cycle durations may change. In this case, in the display, the indication of the running time of the programme is automatically updated.