Electrolux 60750 VI Start the wash programme, Gramme, please read the What to do, if... section

Page 23

Operating Instructions

5)During the AUTOMATIC programmes, the level of soiling of the dishes is determined via the clouding of the wash water. If the dishes are heavily soiled, the parts of the programme given in brackets are carried out. If the dishes are lightly soiled, these parts of the programme are skipped. For this reason the duration of the programme, water and electricity consumption on AUTOMATIC programmes can vary within the ranges given.

6)Test programme

Start the wash programme

0 1. Open the door of the dishwasher.

2.Check that when the dishes and cutlery are loaded into the dishwasher the spray arms are free to rotate.

3.Open the tap fully.

4.Press the ON/OFF button. The indicator in the ON/OFF button illumi- nates.

5.Press the programme button for the desired programme (see "Pro- gramme Table"). The programme indicator illuminates.

Have you accidentally selected the wrong wash programme?

•If you want to change the wash programme within 6 seconds of mak- ing a programme selection, briefly press the button for the new wash program.

•If you want to change the wash programme at a later point in time, use the following procedure:

–Press the button for the new wash programme and hold it pressed. The indicators for both programmes now flash.

–After a few seconds only the indicator for the new programme flashes. Release the programme button, the new wash programme has been saved.

6.Close the door. After around 6 seconds the door is automatically locked and the selected wash programme begins.

3

If acoustic warning tones can be heard after the start of the pro-

 

gramme, please read the "What to do, if..." section.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents
Ökofavorit 60750 Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use POM For polyoxymethylene, e.g. plastic clips DisposalDisposing of the Packaging Material Disposal of Old AppliancesEconomical and Ecological Dishwashing Fields Appliance Features, Display and ControlDisplay and Control Fields Prior to using for the first timeIndicators Illuminated Indicators Mean That You MustHardness range of the water in your area Adjust the Water SoftenerAdjust Number SaltTurning it anticlockwise Filling with Salt for the Water SoftenerFill with salt Use salt Open the door, remove the lower RackFill with rinse aid Filling with Rinse AidOugh rinsing, spot and streak free drying Age the appliance150 ml Replace the lid and tighten by turn- ing clockwise Adjusting Rinse Aid DosingDaily Use Loading Cutlery and Dishes Forks in the cutlery tray Loading CutleryFore be placed in the upper rack Place knives, small spoons and smallLoad large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans Large PlatesBasket Or work surfaceFold the plate insert to the left Loading Cups, Glasses and Coffee Services Pull out the upper rack to the stop Adjusting the Height of the Upper Rack Lowering the Upper Rack Raising the Upper RackTions given on the detergent packaging Filling with DetergentUse only dishwasher detergent Fill with DetergentAuto 65 and Auto BIO 50 Wash Programmes Bio Wash Programmes and Concentrated DetergentsDetergent recommendations Selecting the Wash Programme Programme Table Gramme, please read the What to do, if... section Start the wash programmeHave you accidentally selected the wrong wash programme? Only in emergencies Deleting a wash programmeInterrupting the wash programme Load Sensing Sensor Logic Setting or Changing the Delay Start TimerSetting the delay start Changing the start delayUnlocked and a continuous tone sounds for 5 seconds Switching Off the DishwasherEmptying the Dishwasher Cleaning the Filter Care and CleaningWhat to do, if Symptom Possible Cause Remedy Wrong wash programme was selected There are problems with the operation of the dish- washerWash result is not satisfactory Dishes are still dirtyDecrease rinse aid dosing Technical DataDishes are wet and dull Rinse aid was not used Rinse aid container is emptyExample Loading Arrangements Fitting the Furniture Door Panel Installing the DishwasherSee installation template supplied Following dimensionsConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressureSink outlet connection Water drainDrain hose Extension hosesAppliance is automatically pumped out Leak Prevention SystemMeasures not be observed Electrical ConnectionChanging a fuse Ried out by a qualified electrician or competent personSafely ConnectionsEuropean Guarantee Guarantee ConditionsPage Page Page Calls may be recorded for training purposes 08705 929Customer Care
Top Page Image Contents