Electrolux 60750 VI manual Setting or Changing the Delay Start Timer, Load Sensing Sensor Logic

Operating Instructions

Setting or Changing the Delay Start Timer

Using the delay start timer you can delay. 0 1. Press the ON/OFF button

2.Press the button for the desired wash programme

3.Setting the delay start:

Press the DELAY TIMER button until the indicator next to the number of hours of delay illuminates.

Changing the start delay:

As long as the wash programme has not started, you can still change the delay start set by pressing the DELAY TIMER button.

4.Close the door. At the end of the number of hours set, the door is auto- matically locked and the selected wash programme begins.

Load Sensing – Sensor Logic

If a wash programme is started even though there are only a few dishes in the upper and/or lower rack, an intelligent electronic system adjusts the amount of water and the duration of the wash programme to the number of dishes. By this means it is possible to wash only a few dishes quickly and economically. At half load (6 place settings), up to 2 litres of water and 0.2 kWh of electricity are saved.

25