Electrolux 60750 VI manual Symptom Possible Cause Remedy

Page 29

Operating Instructions

...Warning Tones Indicating a Fault in the Dishwasher.

If one or two repetitive warning tones can be heard after the start of a programme, they indicate a fault in the dishwasher that you can probably rectify yourself. The door of the dishwasher is automatically unlocked when the tones sound.

After rectifying the fault, press the button for the wash programme that has been started and close the door of the dishwasher. The wash programme should continue.

If the same warning tone is heard again, please contact AEG Service Force.

If more than two repetitive warning tones are heard after the pro- gramme start, please contact AEG Service Force. The Service Centre will need to know the number of tones and which indicators on the control and display field are flashing.

Symptom

Possible Cause

Remedy

1 warning tone that is

Tap is closed.

Open tap.

repeated continuously can

The filter (where

 

be heard and the END indi-

Clean the filter in the

present) in the threaded

cator and the programme

threaded hose fitting.

hose fitting is blocked.

display on the

 

 

 

control and display field are

 

 

flashing.

The water inlet hose is

Check hose installation.

The WATER indicator is per-

not correctly laid.

 

manently illuminated.

 

 

2 warning tones that are

The siphon is blocked.

Clean siphon.

continuously repeated can

 

 

be heard and the DRYING

The water drain hose is

Check hose installation.

indicator on the control and

not correctly laid.

display field is flashing.

 

 

 

3 warning tones that are

 

 

continuously repeated can

 

 

be heard and the DRYING

The leak prevention sys-

Close the tap and contact

and END indicators on the

tem has been triggered.

AEG Service Force.

control and display field are

 

 

flashing.

 

 

 

 

 

29

Image 29 Contents
Ökofavorit 60750 Dear customer Tips on using the appliancePlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Installation, Connection and Placing into Operation Safety InstructionsChild Safety General SafetyCorrect Use Disposing of the Packaging Material DisposalDisposal of Old Appliances POM For polyoxymethylene, e.g. plastic clipsEconomical and Ecological Dishwashing Fields Appliance Features, Display and ControlIndicators Prior to using for the first timeIlluminated Indicators Mean That You Must Display and Control FieldsAdjust Number Adjust the Water SoftenerSalt Hardness range of the water in your areaFill with salt Filling with Salt for the Water SoftenerUse salt Open the door, remove the lower Rack Turning it anticlockwiseOugh rinsing, spot and streak free drying Filling with Rinse AidAge the appliance Fill with rinse aid150 ml Replace the lid and tighten by turn- ing clockwise Adjusting Rinse Aid DosingDaily Use Loading Cutlery and Dishes Fore be placed in the upper rack Loading CutleryPlace knives, small spoons and small Forks in the cutlery trayBasket Loading Pans, Frying Pans Large PlatesOr work surface Load large and heavily soiled dishes in the lower rackFold the plate insert to the left Loading Cups, Glasses and Coffee ServicesLowering the Upper Rack Adjusting the Height of the Upper RackRaising the Upper Rack Pull out the upper rack to the stopUse only dishwasher detergent Filling with DetergentFill with Detergent Tions given on the detergent packagingAuto 65 and Auto BIO 50 Wash Programmes Bio Wash Programmes and Concentrated DetergentsDetergent recommendations Selecting the Wash Programme Programme Table Gramme, please read the What to do, if... section Start the wash programmeHave you accidentally selected the wrong wash programme? Only in emergencies Deleting a wash programmeInterrupting the wash programme Setting the delay start Setting or Changing the Delay Start Timer Changing the start delay Load Sensing Sensor LogicUnlocked and a continuous tone sounds for 5 seconds Switching Off the DishwasherEmptying the Dishwasher Cleaning the Filter Care and CleaningWhat to do, if Symptom Possible Cause Remedy Wash result is not satisfactory There are problems with the operation of the dish- washerDishes are still dirty Wrong wash programme was selectedDishes are wet and dull Technical DataRinse aid was not used Rinse aid container is empty Decrease rinse aid dosingExample Loading Arrangements See installation template supplied Installing the DishwasherFollowing dimensions Fitting the Furniture Door PanelWater Connection Connecting the DishwasherPermitted water pressure Connect the inlet hoseDrain hose Water drainExtension hoses Sink outlet connectionAppliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionRied out by a qualified electrician or competent person Measures not be observedSafely ConnectionsEuropean Guarantee Guarantee ConditionsPage Page Page Calls may be recorded for training purposes 08705 929Customer Care